Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Taski Sani Acid W3f
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional use only AISE-P305 - Sanitary cleaner. Manual process AISE-P306 - Sanitary cleaner. Spray and wipe manual process
Uses advised against
Uses other than those identified are not recommended
Manufacturers & Suppliers
Diversey local operating company
local supplier
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| phosphoric acid EC: 231-633-2 | 7664-38-2 | 30 - 50% | Yes |
| alkyl alcohol ethoxylate | 69011-36-5 | 3 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from source of exposure. Get medical attention immediately.
Symptoms: Severe irritant, may cause respiratory tract irritation.
Rinse with plenty of water. Take off all contaminated clothing immediately. Get medical attention.
Symptoms: Causes burns.
Wash off immediately with plenty of water. Get medical attention immediately.
Symptoms: Causes severe or permanent damage.
Remove material from mouth. Immediately drink 1-2 glasses of water or milk. Get medical attention immediately.
Symptoms: Causes burns. Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drainage system, surface or ground water. Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
TASKI Sani Clonet W4f
UFI: KQ75-W0JA-000Q-69R1
TASKI Sani Clonet Pur-Eco W4f
UFI: TMU0-P0J3-J00A-R73S
TASKI CALCACID W3
---
Taski Jontec Tensol Conc F3d
---
VERSATIC™ Acid 10
CAS: 26896-20-8
Cell Wash Solution II / Acid Wash
---
Sulfanilic acid
CAS: 121-57-3
Acid wash Solution 2x2 L
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Do not mix with other products unless advised by Diversey.
Store in original container. Keep container tightly closed.
Handle in accordance with good industrial hygiene and safety practice. For advice on general occupational hygiene see sub section 8.2.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required.
Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber, Penetration time: >= 480 min, Material thickness: >= 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber, Penetration time: >= 30 min, Material thickness: >= 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen.
Safety glasses or goggles (EN 166).
No special requirements under normal use conditions.
Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes may occur.
Should not reach sewage water or drainage ditch undiluted or unneutralised.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
Keep away from products containing chlorine-based bleaching agents or sulphites. Reacts with alkali and metals.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1805
- Shipping Name
- Phosphoric acid, solution
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Taski Sani Acid W3f?
The signal word is na: r-phrases.
What is the physical form of Taski Sani Acid W3f?
Taski Sani Acid W3f is a liquid with clear colourless color. It has slightly perfumed odor.
What is Taski Sani Acid W3f used for?
For professional use only AISE-P305 - Sanitary cleaner. Manual process AISE-P306 - Sanitary cleaner. Spray and wipe manual process
What is the melting point of Taski Sani Acid W3f?
The melting point is Not determined and the boiling point is Not determined.