NextSDS Logo
Safety Data Sheet EN

TASKI Sani Clonet W4f

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TASKI Sani Clonet W4f

Regulatory Identifiers

CAS Number
N/A
UFI Code
KQ75-W0JA-000Q-69R1

Identified Uses

Toilet bowl cleaner. For professional use only.

Uses advised against

Uses other than those identified are not recommended.

Manufacturers & Suppliers

D

Diversey Europe Operations BV

De Corridor 4, 3621ZB Breukelen [Maarssenbroeksedijk 2, 3542DN Utrecht], The Netherlands

D

Diversey Ltd

Weston Favell Centre, Northampton NN3 8PD, United Kingdom

01604 405311

Emergency Contacts

Emergency Contact

0800 052 0185

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Met. Corr. Cat. 1 H290

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 May be corrosive to metals.
H315 Causes skin and serious eye irritation.
H319 Causes skin and serious eye irritation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

For the full text of the H and EUH phrases mentioned in this Section, see Section 16.

Chemical Name CAS Number Concentration Hazardous
sulphamic acid EC: 226-218-8 5329-14-6 3 - 10% Yes
alkylbenzenesulphonic acid EC: 287-494-3 85536-14-7 3 - 10% Yes
Citric acid EC: 201-069-1 --- 1 - 3% Yes

Workplace exposure limit(s), if available, are listed in subsection 8.1. ATE, if available, are listed in section 11.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

Skin contact

Wash skin with plenty of lukewarm, gently flowing water. If skin irritation occurs: Get medical advice or attention.

Symptoms: Causes irritation.

Eye contact

Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation occurs and persists, get medical attention.

Symptoms: Causes severe irritation.

Ingestion

Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No special requirements under normal use conditions.

Hands

Rinse and dry hands after use. For prolonged contact protection for the skin may be necessary. Repeated or prolonged contact: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: 480 min Material thickness: 0.7 mm Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: 30 min Material thickness: 0.4 mm In consultation with the supplier of protective gloves a different type providing similar protection may be chosen.

Eyes

Safety glasses are not normally required. However, their use is recommended in those cases where splashes may occur when handling the product (EN 16321 / EN 166).

Respiratory

No special requirements under normal use conditions.

Skin/Body

No special requirements under normal use conditions.

Environmental

Should not reach sewage water or drainage ditch undiluted or unneutralised.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Clear, Medium, Red
Colour Intensity
---
Form
---
Odor
Product specific
Odor Threshold
Not applicable
Ph
=< 2 (neat)
Melting Point
Not determined Not relevant to classification of this product
Boiling Point
Not determined See substance data
Flash Point
Not determined
Freezing Point
Not determined Not relevant to classification of this product
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not determined See substance data
Vapor Density
---
Relative Density
1.06 (20 C)
Bulk Density
---
Density
---
Flammability
Not applicable to liquids; Not flammable.
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not applicable.
Solubility
Fully miscible
Partition Coefficient
see subsection 12.3
Solubility In Water
Fully miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Corrosive
Dynamic Viscosity
---
Kinematic Viscosity
Not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1760
Shipping Name
Corrosive liquid, n.o.s. ( alkylsulphonic acid, sulphamic acid )
Transport Class
8
Packing Group
III
ADR

None known.

IMDG

None known.

IATA

None known.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TASKI Sani Clonet W4f?

The signal word is warning.

What is the physical form of TASKI Sani Clonet W4f?

TASKI Sani Clonet W4f is a liquid with clear, medium, red color. It has product specific odor.

What is the solubility of TASKI Sani Clonet W4f?

Fully miscible

What is TASKI Sani Clonet W4f used for?

Toilet bowl cleaner. For professional use only.

What are the hazard statements for TASKI Sani Clonet W4f?

This substance has 3 hazard statements:

  • H290: May be corrosive to metals.
  • H315: Causes skin and serious eye irritation.
  • H319: Causes skin and serious eye irritation.

What is the melting point of TASKI Sani Clonet W4f?

The melting point is Not determined Not relevant to classification of this product and the boiling point is Not determined See substance data.