Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Taski Sani 100 Conc W1a
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional use only. AISE-P305 - Sanitary cleaner. Manual process AISE-P306 - Sanitary cleaner. Spray and wipe manual process
Uses advised against
Uses other than those identified are not recommended
Manufacturers & Suppliers
Diversey Europe Operations BV
Maarssenbroeksedijk 2, 3542DN Utrecht, The Netherlands
Diversey Ltd
Weston Favell Centre, Northampton NN3 8PD, United Kingdom
01604 405311
Emergency Contacts
Emergency Contact
0800 052 0185
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| alkyl alcohol ethoxylate | 69011-36-5 | 3 - 10% | Yes |
| alkyl alcohol alkoxylate | 196823-11-7 | 1 - 3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash skin with plenty of lukewarm, gently flowing water. If skin irritation occurs: Get medical advice or attention.
Symptoms: No known effects or symptoms in normal use.
Immediately rinse eyes cautiously with lukewarm water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation occurs and persists, get medical attention.
Symptoms: Causes severe irritation.
Immediately drink 1 glass of water. Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special measures required.
Do not allow to enter drainage system, surface or ground water. Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Use personal protective equipment as required. Use only with adequate ventilation.
Store in accordance with local and national regulations. Keep only in original container. Store in a closed container.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Undiluted: No special requirements under normal use conditions. Diluted: Provide a good standard of general ventilation.
Rinse and dry hands after use. For prolonged contact protection for the skin may be necessary.
Undiluted: Safety glasses are not normally required. However, their use is recommended in those cases where splashes may occur when handling the product (EN 166).
No special requirements under normal use conditions.
Undiluted: No special requirements under normal use conditions. Diluted: No special requirements under normal use conditions.
No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
Reacts with acids.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Taski Sani 100 Conc W1a?
The signal word is warning.
What is the physical form of Taski Sani 100 Conc W1a?
Taski Sani 100 Conc W1a is a liquid with clear, red color. It has slightly perfumed odor.
What is Taski Sani 100 Conc W1a used for?
For professional use only. AISE-P305 - Sanitary cleaner. Manual process AISE-P306 - Sanitary cleaner. Spray and wipe manual process
What are the hazard statements for Taski Sani 100 Conc W1a?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Taski Sani 100 Conc W1a?
The melting point is Not determined and the boiling point is Not determined.