Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OPSITE MOISTURE VAPOUR PERMEABLE SPRAY DRESSING
- Product Code
- 66004978
- Synonyms
- OPSITE SPRAY
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Spray dressing for dry wounds.
Manufacturers & Suppliers
Smith & Nephew Pty. Limited
manufacturer
85 Waterloo Road, North Ryde, NSW 2113
(02) 9857 3999
Emergency Contacts
Smith & Nephew Pty. Limited
(02) 9857 3999
business hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move individual to fresh air. Seek medical attention if effects persist. Restore and/or support breathing as required.
Wash thoroughly with soap and water. Get medical attention if effects persist.
Rinse eye with water for 15 minutes, whilst lifting eyelid. Get medical attention if effects persist.
DO NOT induce vomiting. Give water to drink. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately.
Medical Treatment
Take care to avoid aspiration into the lungs if the patient vomits.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray or fog, dry chemical, foam, carbon dioxide. Water spray can be used to keep fire-exposed containers cool.
Undamaged aerosol cans are unlikely to cause a fire, however they can be ignited in a fire situation and contribute highly flammable fuel to the fire. If unrestrained they can rocket and start several simultaneous fires and cause the fire protection system to be overwhelmed. Leaking containers will form vapours that are heavier than air and may travel a long distance to an ignition source and flashback.
Wear self-contained breathing apparatus and wear full protective clothing when fighting fires.
Firefighter Protection
Wear self-contained breathing apparatus and wear full protective clothing when fighting fires.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop source of spill.
Prevent from entering sewer, drains or other bodies of water.
Absorb spill with sand or vermiculite and place in a sealed, labelled container for disposal.
Materials: sand or vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always invert can for use. DO NOT spray near eyes. Avoid inhalation. DO NOT spray near naked lights as contents are highly flammable. AVOID USE in confined spaces.
Store in a cool, well-ventilated area away from sources of ignition, heat, sparks, flames and strong oxidising agents. Do not store in confined spaces such as basements. Do not store near exits, as the aerosols may become a significant danger in the event of fire.
Store away from sources of ignition, heat, sparks, flames. Handle carefully, pallet loads should be stored in cages, so that in the event of a fire, flammable aerosol propellant cans cannot rocket and start several simultaneous fires.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at room temperature
hydrolysed by strong acids
Will not occur
Heat and ignition sources and exposure to direct sunlight.
strong oxidising agents, acids and bases.
Acetic acid, combustion will generate oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is OPSITE MOISTURE VAPOUR PERMEABLE SPRAY DRESSING known by?
OPSITE MOISTURE VAPOUR PERMEABLE SPRAY DRESSING is also known as: OPSITE SPRAY
What is the hazard signal word for OPSITE MOISTURE VAPOUR PERMEABLE SPRAY DRESSING?
The signal word is na: r-phrases.
What is the physical form of OPSITE MOISTURE VAPOUR PERMEABLE SPRAY DRESSING?
OPSITE MOISTURE VAPOUR PERMEABLE SPRAY DRESSING is a aerosol appearing as pressurised 110 ml aluminium monobloc aerosol can, containing an acrylic polymer, flammable solvent and flammable propellant gas. with a strong acetone / ethyl acetate / alcohol odour. . It has strong acetone / ethyl acetate / alcohol odour odor.
What is OPSITE MOISTURE VAPOUR PERMEABLE SPRAY DRESSING used for?
Spray dressing for dry wounds.
What is the melting point of OPSITE MOISTURE VAPOUR PERMEABLE SPRAY DRESSING?
The melting point is Not determined and the boiling point is Not determined.