Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GRF GASLEAKDETECTOR AE 400ML*12 L313
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal-working product
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Bison International
manufacturer
Dr.A.F.Philipsstraat 9, NL-4462 EW Goes, PO Box 160, NL-4460 AD Goes
+31 88 3235700
Emergency Contacts
Bison and Griffon products
+31 88 3235700
mo-fr 08:00h-17:00h (CET)
UHU products
+ 49 (0) 30/19240
mo-fr 08:00h-17:00h (CET)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Metal working product
For the wording of the listed hazard phrases refer to section 16.
Notes
Dangerous components: Void
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints. No special measures required.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
No special measures required.
Absorb liquid components with liquid-binding material.
Materials: liquid-binding material
Related Products
Similar products with comparable safety profiles
GRF LOCK SPRAY AE 150ML*12 L223
---
MOTIP LEAK DETECTOR 400 ML
---
GRF CLEANER PVC TI 1L*6 L058
CAS: 78-93-3
800 Gas leak Detector
---
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF UNI-100 XT BO 1L*8 ENDE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Observe official regulations on storing packagings with pressurised containers.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR. Recommended thickness of the material: > 0,12 mm. Penetration time of glove material: For the mixture of chemicals mentioned below the penetration time has to be at least 10 minutes (Permeation according to EN 374 Part 3: Level 1).
Not required.
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations.
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases. SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow 'separated from' class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GRF GASLEAKDETECTOR AE 400ML*12 L313?
The signal word is warning.
What is the physical form of GRF GASLEAKDETECTOR AE 400ML*12 L313?
GRF GASLEAKDETECTOR AE 400ML*12 L313 is a aerosol appearing as form: aerosol with according to product specification color. It has characteristic odor.
What is the solubility of GRF GASLEAKDETECTOR AE 400ML*12 L313?
water: Not miscible or difficult to mix.
What is GRF GASLEAKDETECTOR AE 400ML*12 L313 used for?
Metal-working product
What are the hazard statements for GRF GASLEAKDETECTOR AE 400ML*12 L313?
This substance has 1 hazard statement:
- H229: Pressurised container: May burst if heated.
What is the melting point of GRF GASLEAKDETECTOR AE 400ML*12 L313?
The melting point is 0 °C and the boiling point is 100 °C.