Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DEVCON® Plastic Steel® Liquid (B) Resin
- Product Form
- Liquid
- Product Code
- 0101
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Not available.
Uses advised against
None known.
Manufacturers & Suppliers
ITW Performance Polymers
manufacturer
Bay 150, Shannon Industrial Estate, Co. Clare, Ireland, V14 DF82
353(61)771500
Emergency Contacts
Emergency Contact
44(0) 1235 239 670
24 hours
General in EU
112
Available 24 hours a day.
Austria National Poisons Information Center
+431 406 4343
Available 24 hours a day.
Belgium National Poisons Control Center
070 245 245
Available 24 hours a day.
Bulgaria National Toxicological Information Center
+359 2 9154 233
Available 24 hours a day.
Croatia Poisons Information Center
+385 1 2348 342
Cyprus Poison Center
1401
Available 24 hours a day.
Czech Republic National Poisons Information Center
+420 224 919 293
Czech Republic National Poisons Information Center
+420 224 915 402
Denmark National Poisons Control Center
+45 82 12 12 12
Available 24 hours a day.
Estonia National Poisons Information Center
16662
Monday 9:00AM to Saturday 9:00AM (closed on Sundays and on national holidays).
Estonia National Poisons Information Center
(+372) 626 9390
Monday 9:00AM to Saturday 9:00AM (closed on Sundays and on national holidays).
Finland National Poison Information Center
(09) 471 977
Available 24 hours a day.
Finland National Poison Information Center
(09) 4711
Available 24 hours a day.
France National Poisons Control Center (ORFILA number (INRS))
+33 (0) 1 45 42 59 59
Available 24 hours a day.
Greece Poison Information Centre
(0030) 2107793777
Available 24 hours a day.
Hungary National Emergency Phone Number
+36-80-201-199
Available 24 hours a day.
Iceland Poison Center
(+354) 543 2222
Available 24 hours a day.
Latvia Emergency medical aid
113
Latvia Poison and Drug Information Center
+371 67042473
Available 24 hours a day.
Lithuania Neatidéliotina informacija apsinuodijus
+370 5 236 20 52
Lithuania Neatidéliotina informacija apsinuodijus
+37068753378
Malta Accident and Emergency Department
2545 4030
Netherlands National Poisons Information Center (NVIC)
+31 (0)88 755 8000
Norway Norwegian Poison Information Center
22 59 13 00
Available 24 hours a day.
Portugal Poison Center
800 250 250
Available 24 hours a day.
Romania Biroul RSI si Informare Toxicologica
021.318.36.06
Available 8:00AM-3:00PM.
Slovakia National Toxicological Information Center
+421 2 5477 4166
Available 24 hours a day.
Spain Toxicology Information Service
+ 34 91 562 04 20
Available 24 hours a day.
Sweden National Poison Information Center
112
Available 24 hours a day.
Switzerland Tox Info Suisse
145
Available 24 hours a day.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ferrosilicon, [with >= 30% But <= 70% Silicon] | 8049-17-0 | 40 - 70% | No |
| Epoxy Resin: reaction product of bisphenol A and epichlorohydrin (refer to epichlorohydrin) | 25068-38-6 | 15 - 40% | Yes |
| Aromatic Hydrocarbon Solvents EC: 265-199-0 | 64742-95-6 | 0.2% | Yes |
| Other components below reportable levels | --- | 1 - 3% | No |
Notes
The full text for all H-statements is displayed in section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Call a physician if symptoms develop or persist.
Remove contaminated clothing immediately and wash skin with soap and water. In case of eczema or other skin disorders: Seek medical attention and take along these instructions. Wash contaminated clothing before reuse.
Symptoms: Skin irritation. May cause redness and pain. May cause an allergic skin reaction. Dermatitis. Rash.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Symptoms: Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.
Rinse mouth. Get medical attention if symptoms occur.
Immediate Medical Attention
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Medical Treatment
Provide general supportive measures and treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Move containers from fire area if you can do so without risk. Use standard firefighting procedures and consider the hazards of other involved materials.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Avoid breathing mist/vapors. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Do not touch or walk through spilled material. For emergency responders: Keep unnecessary personnel away. Ensure adequate ventilation. Avoid breathing mist/vapors. Local authorities should be advised if significant spillages cannot be contained. Use personal protection recommended in Section 8 of the SDS.
Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.
Avoid discharge into drains, water courses or onto the ground.
Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Materials: vermiculite, dry sand, earth, absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing mist/vapors. Avoid contact with eyes, skin, and clothing. Avoid prolonged exposure. Wear appropriate personal protective equipment.
Store in tightly closed container.
Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
The product is stable and non-reactive under normal conditions of use, storage and transport.
No dangerous reaction known under conditions of normal use.
Contact with incompatible materials.
Strong oxidizing agents.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DEVCON® Plastic Steel® Liquid (B) Resin?
The signal word is warning.
What is the physical form of DEVCON® Plastic Steel® Liquid (B) Resin?
DEVCON® Plastic Steel® Liquid (B) Resin is a liquid. with dark grey color. It has slight. odor.
What is DEVCON® Plastic Steel® Liquid (B) Resin used for?
Not available.
What are the hazard statements for DEVCON® Plastic Steel® Liquid (B) Resin?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
What is the melting point of DEVCON® Plastic Steel® Liquid (B) Resin?
The melting point is Not available. and the boiling point is 608 °F (320 °C) estimated.