Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DEVCON® Bronze Putty (BR) Resin
- Product Code
- 0134
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Not available.
Uses advised against
None known.
Manufacturers & Suppliers
ITW Performance Polymers
manufacturer
30 Endicott Street, Danvers, MA 01923, United States
978-777-1100
http://www.itwperformancepolymers.com
Emergency Contacts
Chemtrec
800-424-9300
International
703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Copper | 7440-50-8 | 30 - 60% | No |
| Epoxy Resin: reaction product of Bisphenol A and epichlorohydrin (refer to epichlorohydrin) | 25068-38-6 | 10 - 30% | No |
| Zinc | 7440-66-6 | 10 - 30% | No |
| Other components below reportable levels | --- | 5 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Call a physician if symptoms develop or persist.
Remove contaminated clothing immediately and wash skin with soap and water. In case of eczema or other skin disorders: Seek medical attention and take along these instructions. Wash contaminated clothing before reuse.
Symptoms: Skin irritation. May cause redness and pain. May cause an allergic skin reaction. Dermatitis. Rash.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Symptoms: Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.
Rinse mouth. Get medical attention if symptoms occur.
Immediate Medical Attention
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Medical Treatment
Provide general supportive measures and treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Use water spray to cool unopened containers. Use standard firefighting procedures and consider the hazards of other involved materials.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained.
Clean surface thoroughly to remove residual contamination.
Stop the flow of material, if this is without risk. Following product recovery, flush area with water.
Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground.
Following product recovery, flush area with water. Clean surface thoroughly to remove residual contamination.
Related Products
Similar products with comparable safety profiles
DEVCON® Plastic Steel® Putty (A) Resin
---
Devcon Plastic Steel Putty A (Resin)
---
DEVCON® Plastic Steel® 5 Minute® Putty (SF) Resin
---
DEVCON® Plastic Steel® 5 Minute® Putty (SF) Hardener
---
DEVCON® 5 Minute® Epoxy Resin
---
DEVCON® 5 Minute® Epoxy Resin
---
DEVCON® Plastic Steel® Liquid (B) Resin
---
DEVCON® Aluminum Liquid (F-2) Resin
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing dust/fume/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Provide adequate ventilation. Wear appropriate personal protective equipment. Avoid release to the environment. Observe good industrial hygiene practices.
Store in tightly closed container.
Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
The product is stable and non-reactive under normal conditions of use, storage and transport.
No dangerous reaction known under conditions of normal use.
Contact with incompatible materials.
Strong oxidizing agents.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Results of PBT and vPvB assessment
Endocrine disrupting properties
Ecotoxicity
The substance is classified as toxic to aquatic life.
Persistence and degradability
No data available regarding degradability.
Bioaccumulative potential
No data available regarding bioaccumulative potential.
Mobility in soil
No data available regarding mobility in soil.
Other adverse effects
No other adverse environmental effects are expected.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Collect and reclaim or dispose in sealed containers at licensed waste disposal site.
Dispose of in accordance with local regulations. This material and its container must be disposed of in a safe manner.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DEVCON® Bronze Putty (BR) Resin?
The signal word is warning.
What is the physical form of DEVCON® Bronze Putty (BR) Resin?
DEVCON® Bronze Putty (BR) Resin is a solid. appearing as paste. with bronze. color. It has slight. odor.
What is DEVCON® Bronze Putty (BR) Resin used for?
Not available.
What are the hazard statements for DEVCON® Bronze Putty (BR) Resin?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H400: Toxic to aquatic life.
What is the melting point of DEVCON® Bronze Putty (BR) Resin?
The melting point is Not available. and the boiling point is 608 °F (320 °C) estimated.