Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- mucasol®
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Schülke & Mayr GmbH
manufacturer
Robert-Koch-Str. 2, 22851 Norderstedt, Germany
+49 (0)40/ 52100-0
http://www.schuelke.com
Schülke & Mayr UK Ltd.
distributor
Cygnet House, 1, Jenkin Road, Meadowhall, Sheffield S9 1AT, United Kingdom
+44 114 254 35 00
Emergency Contacts
Carechem 24 International
+44 1235 239670
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Solution of the following substances with harmless additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| tripotassium orthophosphate EC: 231-907-1 | 7778-53-2 | 20 - 30% | Yes |
7778-53-2 REACH registration numbers can not be provided because the product is exempted from the registration requirements according to REACH Title II ., This product is an ionic mixture.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Symptoms: respiratory irritation
Wash with water and soap as a precaution.
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician immediately.
Symptoms: serious eye damage
Rinse mouth. Do NOT induce vomiting. Obtain medical attention.
Immediate Medical Attention
Call a physician immediately (eye contact); Obtain medical attention (ingestion); If symptoms persist, call a physician (inhalation).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Foam, Dry powder, Water spray jet
Do NOT use water jet.
No information available.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Increased risk of slipping in the presence of leaked / spilled product. Use personal protective equipment.
Avoid subsoil penetration.
Wipe up with absorbent material (e.g. cloth, fleece). Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: cloth, fleece, sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes.
Store at room temperature in the original container. Keep away from heat. Keep away from direct sunlight. Keep container tightly closed. Recommended storage temperature: 5 - 25°C
Keep away from food and drink.
No special protective measures against fire required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Directive: The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Remarks: Splash protection: disposable nitrile rubber gloves e.g. Dermatril (layer thickness: 0.11 mm) made by KCL or gloves from other manufacturers offering the same protection. Prolonged contact: Nitrile rubber gloves e.g. Camatril (>480 Min., layer thickness: 0,40 mm) or butyl rubber gloves e.g. Butoject (>480 Min., layer thickness: 0,70 mm) made by KCL or gloves from other manufacturers offering the same protection. Prolonged contact: Butyl rubber gloves e.g. Butoject (>480 Min., layer thickness: 0.70 mm) made by KCL or gloves from other manufacturers offering the same protection.
Safety glasses with side-shields conforming to EN166
No personal respiratory protective equipment normally required.
Work uniform or laboratory coat.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No dangerous reaction known under conditions of normal use.
Reaction with oxidising agents
Protect from frost, heat and sunlight.
Possible incompatibility with alkali sensitive materials.
None reasonably foreseeable.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1719
- Shipping Name
- CAUSTIC ALKALI LIQUID, N.O.S. (Tripotassium orthophosphate)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for mucasol®?
The signal word is danger.
What is the physical form of mucasol®?
mucasol® is a liquid appearing as liquid with nearly colourless, -, light yellow color.
What is mucasol® used for?
Cleaning agent
What are the hazard statements for mucasol®?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
What is the melting point of mucasol®?
The melting point is < 0 °C and the boiling point is > 100 °C.