ANTICORIT VCI UNI O 40

Supply fresh air; consult doctor in case of symptoms.

Immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash contaminated clothing before reuse. Get medical attention.

Symptoms: Causes skin irritation.

Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. Get medical attention.

Symptoms: Causes serious eye irritation.

Rinse mouth. Call a POISON CENTER or doctor/ physician if you feel unwell.

CO2, fire extinguishing powder or fog like water spraying. Extinguish larger fires with alcohol resistant foam or spray water with suitable surfactant added

Water with a full water jet.

During fire, gases hazardous to health may be formed.

Move container from fire area if it can be done without risk.

Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Keep unauthorized personnel away. In case of spills, beware of slippery floors and surfaces.

Prevent from spreading (e.g. by binding or oil barriers). Avoid release to the environment. Environmental manager must be informed of all major spillages. Prevent further leakage or spillage if safe to do so.

Absorb with liquid-binding material

Materials: sand, diatomite, acidbinders, universal binders, sawdust

Avoid contact with eyes. Wash hands thoroughly after handling. Do not eat, drink or smoke when working with the product. Take usual precautions when handling mineral oil products or chemical products. Avoid contact with skin. Prevent formation of aerosols. Observe good industrial hygiene practices.

Local regulations concerning handling and storage of waterpolluting products have to be followed.

Wash hands thoroughly after handling. Do not eat, drink or smoke when working with the product. Observe good industrial hygiene practices.

Provide adequate ventilation. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Material: Nitrile butyl rubber (NBR). Min. Breakthrough time: >= 480 min Recommended thickness of the material: >= 0,38 mm. Avoid long-term and repeated skin contact. Suitable gloves can be recommended by the glove supplier. Use skin protection cream for preventive skin protection. Protective gloves, where permitted in acc. to safety directions. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Avoid contact with skin and eyes. Goggles/face shield are recommended. If risk of splashing, wear safety goggles or face shield.

Ensure good ventilation/exhaustion at the workplace. Avoid breathing vapour/aerosol.

Do not carry cleaning cloths impregnated with the product in trouser pockets. Wear suitable protective clothing.

No data available.

Stable under normal use conditions.

Stable under normal use conditions.

Stable under normal use conditions.

Strong oxidizing substances. Strong acids. Strong bases.

Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.