ANTICORIT PL 39 LV 18

Supply fresh air.

Wash with soap and water.

Promptly wash eyes with plenty of water while lifting the eye lids.

Rinse mouth. Never give liquid to an unconscious person. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Do NOT induce vomiting.

Symptoms: Material may be aspirated into the lungs and cause chemical pneumonitis.

CO2, fire extinguishing powder or fog like water spraying. Extinguish larger fires with alcohol resistant foam or spray water with suitable surfactant added

Water with a full water jet.

During fire, gases hazardous to health may be formed.

Move container from fire area if it can be done without risk.

In case of spills, beware of slippery floors and surfaces.

Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Prevent from spreading (e.g. by binding or oil barriers). Environmental manager must be informed of all major spillages.

Absorb with liquid-binding material (sand, diatomite, acidbinders, universal binders, sawdust).

Materials: sand, diatomite, acidbinders, universal binders, sawdust

Prevent formation of aerosols. Do not eat, drink or smoke when working with the product. Take usual precautions when handling mineral oil products or chemical products.

Store locked up. Local regulations concerning handling and storage of waterpolluting products have to be followed. Do not heat up to temperatures close to the flash point.

Do not eat, drink or smoke when working with the product. Observe good industrial hygiene practices.

Provide adequate ventilation. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Material: Nitrile butyl rubber (NBR). Min. Breakthrough time: >= 480 min Recommended thickness of the material: >= 0,38 mm Avoid long-term and repeated skin contact. Suitable gloves can be recommended by the glove supplier. Use skin protection cream for preventive skin protection. Protective gloves, where permitted in acc. to safety directions. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Safety glasses (EN 166) recommended during refilling.

Ensure good ventilation/exhaustion at the workplace. Avoid breathing vapour/ aerosol.

Do not carry cleaning cloths impregnated with the product in trouser pockets. Wear suitable protective clothing.

No data available.

Stable under normal use conditions.

Stable under normal use conditions.

Stable under normal use conditions.

Stable under normal use conditions.

Strong oxidizing substances. Strong acids. Strong bases.

Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.