Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANTRANCINE 57C
- Product Form
- Mixture
- Product Code
- 266815
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use
Uses advised against
No additional information available
Manufacturers & Suppliers
IMCD Benelux B.V.
distributor
Wilhelminaplein 32, 3072 DE ROTTERDAM, NETHERLANDS
+31 (0) 88 291 8600
Emergency Contacts
Emergency Contact
+31 (0) 10 713 8195
Emergency Contact
+44 1865 407 333
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bis(2-ethylhexyl) adipate EC: 203-090-1 | 103-23-1 | 59 - 61% | No |
| tert-butyl-4-methoxyphenol EC: 246-563-8 | 25013-16-5 | 39 - 41% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing.
Wash skin with plenty of water.
Rinse eyes with water as a precaution. If eye irritation persists: Get medical advice/attention. Remove contact lenses, if present and easy to do. Continue rinsing. Rinse cautiously with water for several minutes.
Call a poison center or a doctor if you feel unwell. If swallowed, seek medical advice immediately and show this container or label.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Dry chemical powder, alcohol-resistant foam, carbon dioxide (CO2).
Do not use water jet.
In case of fire and/or explosion do not breathe fumes.
Do not dispose of fire-fighting water in the environment. Use water spray or fog for cooling exposed containers.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. Use self-contained breathing apparatus and chemically protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Evacuate area. Stop leak if safe to do so. Evacuate unnecessary personnel.
confine the spill in a dike and charge it with wet sand or earth for subsequent safe disposal
Avoid release to the environment.
Take up liquid spill into absorbent material.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wear personal protective equipment. Ensure that there is a suitable ventilation system. Always wash hands after handling the product. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only in well ventilated areas. Do not eat, drink or smoke during work.
Store in a well-ventilated place. Keep cool. Refer to the detailed list of incompatible materials in section 10 Stability/Reactivity. Keep only in the original container in a cool, well-ventilated place.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station. Control any potential exposure using measures such as contained or enclosed systems, properly designed and maintained facilities and a good standard of general ventilation. Drain down systems and transfer lines prior to breaking containment. Drain down and flush equipment where possible prior to maintenance.
Protective gloves. Chemical resistant gloves (according to European standard NF ISO 374-1 or equivalent). Nitrile rubber gloves. Permeation 3 (> 60 minutes). Layer thickness: 0,12 mm. Esters: Butyl-rubber protective gloves > 120 min (ISO 374-1)
Safety glasses. Chemical goggles or face shield with safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment. With filter for particulates/vapors/gases. Full-/Half-/quarter-face masks (DIN EN 136/140). In case of inadequate ventilation wear respiratory protection.
Wear suitable protective clothing. Use chemically protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage and transport.
No dangerous reactions known under normal conditions of use.
None under recommended storage and handling conditions (see section 7).
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The substance is not classified as acutely hazardous to the aquatic environment but is classified as toxic to aquatic life with long-lasting effects.
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
ANTRANCINE 57C and its components (tert-butyl-4-methoxyphenol and bis(2-ethylhexyl) adipate) do not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Do not discharge waste into drains. Disposal must be done according to official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (tert-butyl-4-methoxyphenol)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANTRANCINE 57C?
The signal word is no signal word.
What is the physical form of ANTRANCINE 57C?
ANTRANCINE 57C is a liquid with light yellow. color. It has characteristic. odor.
What is the solubility of ANTRANCINE 57C?
Water: Insoluble
What is ANTRANCINE 57C used for?
Industrial use
What are the hazard statements for ANTRANCINE 57C?
This substance has 1 hazard statement:
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of ANTRANCINE 57C?
The melting point is Not available and the boiling point is Not determined.