TANDEMOL ADDITIVE 24

In case of big quantities inhaled, move affected person to fresh air, keep warm and allow to rest.

Remove contaminated clothing and wash the skin thoroughly with soap and water.

Rinse eyes thoroughly with clean and fresh water.

Do not induce vomiting. In case of swallowing, keep the patient at rest.

water jet, foam, powder, carbon dioxide (CO2)

water jet

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.

Consult the safety measures listed under headings 7 and 8.

Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for waste disposal. Prevent any material from entering drains or waterways.

Pick up the liquid with pomps or shovels. Clean preferably with a detergent, do not use solvents.

Avoid direct contact with the product. Prevent access by unauthorised personnel. For personal protection, see section 8. Observe precautions stated on label and also industrial safety regulations. Never open packages under pressure.

Storage temperature: 5 - 40 °C

Always wash hands after handling. No smoking, eating or drinking in areas where the mixture is used.

Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general extraction.

Wear suitable protective gloves in the event of prolonged or repeated skin contact. Gloves of appropriate material (i.e. nitrilic rubber, specification: penetration time: level 6, >480 min., thickness 0,9-1 mm; CE-certified acc. EN 374 cat III). Use appropriate protection cream, especially if for safety reasons protective gloves are not advisable.

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes. Before handling, wear safety goggles in accordance with standard EN166.

In case of forming of mist or if ventilation is not sufficient it's recommended to wear breathing apparatus (type FFA1P1 according to standard CE EN 405).

Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed. Standard issue working clothes. Safety shoes or boots - chemical resistant. Avoid long and intensive skin contact. Before working use protection cream. Don't keep lubricant contaminated rags in pockets of working clothes.

This mixture is stable under the recommended handling and storage conditions in section 7.

No data available.

No data available.

Heat ( temperature higher than flash point), sparks, flames and other ignition sources.

strong oxidising agents, strong reducing agents

carbon monoxide (CO), carbon dioxide (CO2)

Do not pour into drains or waterways. Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.

Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.