Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Oregon Markierspray neon
- Product Code
- 5194..
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint
Manufacturers & Suppliers
Stanger Produktions- und Vertriebs GmbH & Co KG
manufacturer
Ferdinand-Porsche-Straße 2, D-32339 Espelkamp
+49 5743-9307-0
Emergency Contacts
Emergency Contact
+49-5743-9307-0
Monday to Friday, 7:00 a.m. - 5:00 p.m.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propane EC: 200-827-9 | 74-98-6 | 25 - 75% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 25% | Yes |
| Naphtha (petroleum), hydrotreated light EC: 265-151-9 | 64742-49-0 | 10 - 20% | Yes |
| Naphtha (petroleum), hydrotreated heavy EC: 919-857-5 | 64742-48-9 | 3% | Yes |
| ethanol EC: 200-578-6 | 64-17-5 | 3% | Yes |
| Reaktionsmasse von Ethylbenzol und Xylol EC: 905-588-0 | --- | 3% | Yes |
| propan-2-ol EC: 200-661-7 | 67-63-0 | 3% | Yes |
| titanium dioxide EC: 236-675-5 | 13463-67-7 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C, i.e. electric lights. Do not pierce or burn, even after use.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. For the permanent contact in work areas without heightened risk of injury (e.g. Laboratory) gloves made of the following material are suitable: Butyl rubber, BR, Nitrile rubber, NBR. For the permanent contact gloves made of the following materials are suitable: Butyl rubber, BR. For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: Nitrile rubber, NBR, Chloroprene rubber, CR.
Not required.
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No further relevant information available regarding aquatic toxicity.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
Not applicable.
12.6 Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
12.7 Other adverse effects
The substance is noted as being harmful to fish.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Smaller quantities can be disposed of with household waste. Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Smaller quantities can be disposed of with household waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labelled according to the GB CLP regulation.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Oregon Markierspray neon?
The signal word is danger.
What is the physical form of Oregon Markierspray neon?
Oregon Markierspray neon is a aerosol with yellow color. It has mild odor.
What is Oregon Markierspray neon used for?
Paint
What are the hazard statements for Oregon Markierspray neon?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.