Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BORON NITRIDE COATINGS
- Chemical Name
- Boron Nitride Coatings
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Not intended for food and drug use
Manufacturers & Suppliers
INSULCON B.V.
P.O. Box 134, 4650 AC STEENBERGEN, The Netherlands; Zilverhoek 4, 4651 SP STEENBERGEN
+31 (0)167-565750
http://www.insulcon.com
KERAMAB N.V.
+32 (0)3 711.02.78
INSULCON GMBH
+49 (0)2162249600
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Barium acetate | 543-80-6 | 5% | No |
| Soluble Barium Compound | --- | 1.5% | No |
| Water | 7732-18-5 | 60 - 95% | No |
| Smectite | 12199-37-0 | 30% | No |
| Boron nitride | 10043-11-5 | 4 - 35% | No |
| Aluminum oxide | 1344-28-1 | 15% | No |
| Non-crystalline hydrated silica | 20243-18-9 | 5% | No |
This product may be regulated, have exposure limits or other information identified as the following: Barium (7440-39-3).
First Aid Measures
Emergency procedures for chemical exposure incidents
Move person to non-contaminated air.
For skin contact flush with large amounts of water while removing contaminated clothing.
Flush immediately with water for at least 15 minutes. Do not rub eyes.
Do not induce vomiting unless instructed to do so by medical personnel.
Immediate Medical Attention
If ingested, get immediate medical attention. If irritation persists (eyes/skin) or symptoms persist (inhalation), get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use methods for the surrounding fire.
This material will not burn.
Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, protective clothing and face mask.
Firefighter Protection
Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, protective clothing and face mask.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate area. Keep unnecessary personnel away.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Boron Nitride Coatings
---
Boron Nitride (BN) Lubricoat
---
Combat Boron Nitride Coatings - Barium Free
---
Boron Nitride (BN) Lubricoat ZV - Blue
UFI: CF7X-GT5P-5Y0H-G2AA
Boron Nitride (BN) Lubricoat ZV - Blue
UFI: CF7X-GT5P-5Y0H-G2AA
Boron oxide, Puratronic®
CAS: 1303-86-2
HARDENER FOR WATERBORNE COATINGS
UFI: YUW0-00GP-800T-XRTD
Boron tribromide
CAS: 10294-33-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid inhalation of vapors or fumes from heated material. Avoid inhalation or contact with from dried product. Wash thoroughly after handling. Launder work clothes frequently. Not for food and drug use.
Store in original containers away from incompatible substances. Do not freeze. Packaging may contain residual preparation. Do not reuse.
Wash thoroughly after handling. Launder work clothes frequently.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Will not occur.
Incompatible substances.
Avoid strong oxidizing agents. Avoid contact with acids.
Decomposition products may include oxides of boron and nitrogen, irritating smoke and fumes, carbon monoxide, carbon dioxide, hydrogen chloride, ammonia, and oxides of magnesium, alumina and barium.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BORON NITRIDE COATINGS?
The signal word is danger.
What is the physical form of BORON NITRIDE COATINGS?
BORON NITRIDE COATINGS is a solid/liquid appearing as white paste or liquid . It has odorless odor.
What is BORON NITRIDE COATINGS used for?
Not intended for food and drug use
What are the hazard statements for BORON NITRIDE COATINGS?
This substance has 9 hazard statements:
- EUH032: Preparation contains a soluble barium salt.
- H302: If ingested, this preparation may cause nausea, vomiting and diarrhea.
- H315: May cause irritation by all routes of exposure.
- H315: Preparation may be irritating to the skin.
- H319: Preparation may be irritating to the eyes.
- H331: When ingested in large amounts, soluble barium salts are muscle poisons causing stimulation of muscle followed by paralysis.
- H335: However, inhalation of dusts from dried preparation may cause respiratory tract irritation, coughing, and shortness of breath.
- H372: Repeated overexposure to dusts from dried preparation may adversely affect the respiratory system.
- Inhalation of wet preparation is unlikely.
What is the melting point of BORON NITRIDE COATINGS?
The melting point is Not applicable and the boiling point is 107°C (225°F).