NextSDS Logo
Safety Data Sheet EN

ClearKlens Solve VH21

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ClearKlens Solve VH21

Regulatory Identifiers

CAS Number
N/A
UFI Code
W0E2-A1HC-J00N-VT79

Identified Uses

Open plant cleaning chemical. For industrial use only.

Uses advised against

Uses other than those identified are not recommended.

Manufacturers & Suppliers

D

Diversey Europe Operations BV

manufacturer

De Corridor 4, 3621ZB Breukelen [Maarssenbroeksedijk 2, 3542DN Utrecht], The Netherlands

D

Diversey Belgium

national supplier

Haachtsesteenweg 672, 1910 Kampenhout, België / Belgique / Belgien

016-617777

Emergency Contacts

Antigifcentrum / Centre Antipoisons / Antigiftzentrum

070-245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Met. Corr. Cat. 1 H290

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P280 Wear protective gloves, protective clothing and eye or face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTRE, doctor or physician.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
sodium alkylbenzenesulphonate EC: 290-656-6 90194-45-9 3 - 10% Yes
sodium cumenesulphonate EC: 239-854-6 15763-76-5 3 - 10% Yes
tetrasodium ethylene diamine tetraacetate EC: 200-573-9 64-02-8 3 - 10% Yes
alcohols, C9-11-iso-, C10-rich, ethoxylated (>10-15EO) 78330-20-8 1 - 3% Yes
sodium hydroxide EC: 215-185-5 1310-73-2 1 - 3% Yes
disodium metasilicate EC: 215-687-4 1344-09-8 1 - 3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Get medical attention or advice if you feel unwell.

Symptoms: No known effects or symptoms in normal use.

Skin contact

Wash skin with plenty of lukewarm, gently flowing water for at least 30 minutes. Take off immediately all contaminated clothing and wash it before reuse. Immediately call a POISON CENTRE, doctor or physician.

Symptoms: Causes severe burns.

Eye contact

Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or physician.

Symptoms: Causes severe or permanent damage.

Ingestion

Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Keep at rest. Immediately call a POISON CENTRE, doctor or physician.

Symptoms: Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.

Immediate Medical Attention

Immediately call a POISON CENTRE, doctor or physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.

Specific hazards

No special hazards known.

Firefighter Protection

As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Large spill

Dyke to collect large liquid spills.

Environmental

Dilute with plenty of water. Do not allow to enter drainage system, surface or ground water.

Cleanup methods

Absorb with liquid-binding material (sand, diatomite, universal binders). Do not place spilled materials back into the original container. Collect in closed and suitable containers for disposal.

Materials: sand, diatomite, universal binders

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Avoid contact with skin and eyes. Use only with adequate ventilation.

Storage

Store in accordance with local and national regulations. Store in a closed container. Keep only in original packaging.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.

Fire prevention

No special precautions required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Undiluted: If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required. Where possible: use in automated/closed system and cover open containers. Transport over pipes. Filling with automatic systems. Use tools for manual handling of product. Diluted: Provide a good standard of general ventilation. Ensure that foam equipment does not generate respirable particles.

Hands

Undiluted: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: ≥ 30 min Material thickness: ≥ 0.4 mm In consultation with the supplier of protective gloves a different type providing similar protection may be chosen. Diluted: Chemical-resistant protective gloves (EN 374) are always recommended for foam applications. Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm In consultation with the supplier of protective gloves a different type providing similar protection may be chosen.

Eyes

Undiluted: Safety glasses or goggles (EN 16321). The use of a full-face shield or other full-face protection is strongly recommended when handling open containers or if splashes may occur. Diluted: Safety glasses or goggles (EN 16321) are always recommended for foam applications.

Respiratory

No special requirements under normal use conditions.

Skin/Body

Undiluted: Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes may occur (EN 14605). Diluted: No special requirements under normal use conditions.

Environmental

Undiluted: Should not reach sewage water or drainage ditch undiluted or unneutralised. Diluted: No special requirements under normal use conditions.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Clear, Pale, from Brown to Yellow
Colour
Clear, Pale, from Brown to Yellow
Colour Intensity
---
Form
---
Odor
Product specific
Odor Threshold
Not applicable
Ph
>= 11.5 (neat)
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
> 100 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not determined
Vapor Density
---
Relative Density
= 1.11 (20 °C)
Bulk Density
---
Density
---
Flammability
Not flammable.
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not applicable.
Solubility
---
Partition Coefficient
---
Solubility In Water
Fully miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Corrosive
Dynamic Viscosity
---
Kinematic Viscosity
Not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage and use conditions.

Reactivity

No reactivity hazards known under normal storage and use conditions.

Hazardous reactions

No hazardous reactions known under normal storage and use conditions.

Avoid

None known under normal storage and use conditions.

Incompatible

May be corrosive to metals. Reacts with acids.

Decomposition

None known under normal storage and use conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1824
Shipping Name
Sodium hydroxide solution
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ClearKlens Solve VH21?

The signal word is danger.

What is the physical form of ClearKlens Solve VH21?

ClearKlens Solve VH21 is a liquid appearing as clear, pale, from brown to yellow with clear, pale, from brown to yellow color. It has product specific odor.

What is ClearKlens Solve VH21 used for?

Open plant cleaning chemical. For industrial use only.

What are the hazard statements for ClearKlens Solve VH21?

This substance has 2 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of ClearKlens Solve VH21?

The melting point is Not determined and the boiling point is Not determined.