Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ClearKlens ECO VH39
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- SEPH-F17Y-U00S-HX0R
Identified Uses
Cleaning in place chemical. For industrial use only..
Uses advised against
Uses other than those identified are not recommended.
Manufacturers & Suppliers
Diversey Europe Operations BV
manufacturer
De Corridor 4, 3621ZB Breukelen [Maarssenbroeksedijk 2, 3542DN Utrecht], The Netherlands
Diversey Belgium
national supplier
Haachtsesteenweg 672, 1910 Kampenhout, België / Belgique / Belgien
016-617777
Emergency Contacts
Antigifcentrum / Centre Antipoisons / Antigiftzentrum
070-245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Citric acid EC: 201-069-1 | --- | 3 - 10% | Yes |
| sulphamic acid EC: 226-218-8 | 5329-14-6 | 3 - 10% | Yes |
| glycolic acid EC: 201-180-5 | 79-14-1 | 3 - 10% | Yes |
| sodium cumenesulphonate EC: 239-854-6 | 15763-76-5 | 1 - 3% | Yes |
| alkyl alcohol alkoxylate | 111905-53-4 | 1 - 3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Wash skin with plenty of lukewarm, gently flowing water for at least 30 minutes. Wash skin with plenty of lukewarm, gently flowing water. Take off immediately all contaminated clothing and wash it before reuse. Immediately call a POISON CENTRE, doctor or physician. If skin irritation occurs: Get medical advice or attention.
Symptoms: skin irritation
Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or physician.
Symptoms: Causes severe or permanent damage.
Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Keep at rest. Immediately call a POISON CENTRE, doctor or physician.
Symptoms: Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
Immediate Medical Attention
Immediately call a POISON CENTRE, doctor or physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Do not breathe dust or vapour.
Dyke to collect large liquid spills.
Dilute with plenty of water. Do not allow to enter drainage system, surface or ground water.
Absorb with liquid-binding material (sand, diatomite, universal binders). Collect in closed and suitable containers for disposal.
Materials: liquid-binding material (sand, diatomite, universal binders)
Related Products
Similar products with comparable safety profiles
ClearKlens Multi VH46
UFI: E3G1-K077-200N-WQDE
ClearKlens Power VH22
UFI: U7V0-70CV-P00S-DM67
ClearKlens Solve VH21
UFI: W0E2-A1HC-J00N-VT79
ClearKlens IPA VH1
UFI: 9FYG-V1JC-F003-5HU7
Clearklens Brite VH3
UFI: 3JE5-A0G9-U00C-6HCE
Clearklens Flow VH20
UFI: DAF5-V0PV-K00T-4KM0
ClearKlens Oxifast
UFI: UJY2-D0MY-S00D-SDNA
Radians / VisionAid Anti-fog/Anti-static Lens Cleaner, Clear
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Avoid contact with skin and eyes. Do not breathe vapours. Use only with adequate ventilation.
Store in accordance with local and national regulations. Store in a closed container. Keep only in original packaging.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Undiluted: If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required. Diluted: Provide a good standard of general ventilation.
Undiluted: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: ≥ 30 min Material thickness: ≥ 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen. Diluted: No special requirements under normal use conditions.
Undiluted: Safety glasses or goggles (EN 16321). The use of a full-face shield or other full-face protection is strongly recommended when handling open containers or if splashes may occur. Diluted: No special requirements under normal use conditions.
Undiluted: If exposure to liquid particles or splashes cannot be avoided use: half mask (EN 140) with particle filter P2 (EN 143) or full-face mask (EN 136) with particle filter P1 (EN 143) Consider specific local use conditions. In consultation with the supplier of respiratory protection equipment a different type providing similar protection may be chosen. Specific applications tools may be available to limit exposure. Please refer to the product information sheet for the possibilities. Apply technical measures to comply with the occupational exposure limits, if available. Diluted: No special requirements under normal use conditions.
Undiluted: Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes may occur (EN 14605). Diluted: No special requirements under normal use conditions.
Undiluted: Should not reach sewage water or drainage ditch undiluted or unneutralised. Diluted: No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
May be corrosive to metals. Reacts with alkali. Keep away from products containing chlorine-based bleaching agents or sulphites.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1760
- Shipping Name
- Corrosive liquid, n.o.s. (citric acid, sulphamic acid)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ClearKlens ECO VH39?
The signal word is danger.
What is the physical form of ClearKlens ECO VH39?
ClearKlens ECO VH39 is a liquid with clear, pale, yellow color. It has product specific odor.
What is ClearKlens ECO VH39 used for?
Cleaning in place chemical. For industrial use only..
What are the hazard statements for ClearKlens ECO VH39?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of ClearKlens ECO VH39?
The melting point is Not determined and the boiling point is Not determined.