ClearKlens IPA VH1

Remove person to fresh air and keep comfortable for breathing.

Symptoms: May cause drowsiness or dizziness.

Wash skin with plenty of lukewarm, gently flowing water. Take off immediately all contaminated clothing and wash it before reuse.

Symptoms: Irritation

Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Symptoms: Irritation

Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person.

Symptoms: No known effects or symptoms in normal use.

Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.

No special hazards known.

Dyke to collect large liquid spills.

Do not allow to enter drainage system, surface or ground water. Dilute with plenty of water.

Absorb with liquid-binding material. Collect in closed and suitable containers for disposal.

Materials: sand, diatomite, universal binders

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash hands before breaks and at the end of workday. Store used personal protective equipment separately. Avoid contact with skin and eyes. Do not breathe vapours. Do not breathe spray.

Store in a well-ventilated place. Store in a closed container. Keep only in original packaging. Keep from freezing. Keep cool. Keep away from heat and direct sunlight. Keep at temperature not exceeding 30 °C.

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Wash hands before breaks and at the end of workday. Store used personal protective equipment separately.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.

Apply the product only in a sufficiently ventilated room. The minimum air change rates required are: - 8/h in laboratories; - 60/h in pharmaceutical and cosmetics manufacturing facilities; - 150/h in cleanrooms.

Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: ≥ 30 min Material thickness: ≥ 0.4 mm In consultation with the supplier of protective gloves a different type providing similar protection may be chosen.

Safety glasses are not normally required. However, their use is recommended in those cases where splashes may occur when handling the product (EN 16321).

Respiratory protection is not normally required. However, inhalation of vapour, spray, gas or aerosols should be avoided.

No special requirements under normal use conditions.

Should not reach sewage water or drainage ditch undiluted or unneutralised.

Stable under normal storage and use conditions.

No reactivity hazards known under normal storage and use conditions.

No hazardous reactions known under normal storage and use conditions.

None known under normal storage and use conditions.

None known under normal use conditions.

None known under normal storage and use conditions.