Rapid Cool Red Antifreeze

Move affected person to fresh air at once. Get medical attention if any discomfort continues.

Symptoms: Vapours in high concentrations are anaesthetic. Symptoms following overexposure may include the following: Headache. Fatigue. Dizziness. Central nervous system depression.

Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if any discomfort continues.

Symptoms: Prolonged skin contact may cause redness and irritation.

Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.

Symptoms: May cause temporary eye irritation.

Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Rinse mouth thoroughly with water. Give plenty of water to drink. Get medical attention immediately.

Symptoms: Ingestion of large amounts may cause unconsciousness. Causes damage to organs (Kidneys) through prolonged or repeated exposure if swallowed

Extinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog.

Do not use water jet as an extinguisher, as this will spread the fire.

Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.

Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.

Follow precautions for safe handling described in this safety data sheet. Avoid inhalation of spray mist and contact with skin and eyes.

Spillages or uncontrolled discharges into watercourses must be reported immediately to the Environmental Agency or other appropriate regulatory body.

Flush contaminated area with plenty of water. Collect and place in suitable waste disposal containers and seal securely.

Avoid spilling. Avoid contact with skin and eyes. Avoid inhalation of vapours and spray/mists.

Store in tightly-closed, original container in a dry, cool and well-ventilated place.

Provide adequate ventilation. Avoid inhalation of vapours. Observe any occupational exposure limits for the product or ingredients.

Use protective gloves. Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. The most suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can provide information about the breakthrough time of the glove material. Butyl rubber. Polyvinyl chloride (PVC). To protect hands from chemicals, gloves should comply with European Standard (EN374).

Chemical splash goggles. Personal protective equipment for eye and face protection should comply with European Standard (EN166).

If ventilation is inadequate, suitable respiratory protection must be worn. Wear a respirator fitted with the following cartridge: Combination filter, type A2/P3. EN 136/140/141/145/143/149

Avoid release to the environment.

Stable under normal conditions.

None anticipated.

Will not polymerise.

Avoid excessive heat for prolonged periods of time.

Strong oxidising agents. Strong acids. Strong alkalis.

Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours. Aldehydes. Ketones. Oxides of the following substances: Carbon.