NextSDS Logo
Safety Data Sheet EN

CL-TKDK 090

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CL-TKDK 090

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaning agent. Reserved for industrial and professional use.

Manufacturers & Suppliers

REA Elektronik GmbH logo

REA Elektronik GmbH

manufacturer

Teichwiesenstr. 1, 64367 Mühltal-Waschenbach, Germany

+49 (0) 6154 / 638-0

http://www.rea-jet.de

H

Hotline Inkjet, REA Elektronik GmbH

manufacturer

+49 (0) 6154 - 638 1111

Emergency Contacts

Emergency Contact

+49 (0) 6131 – 19240

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Avoid breathing vapours.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a POISON CENTER/doctor if you feel unwell.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Methyl ethyl ketone EC: 201-159-0 78-93-3 90 - 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move victim to fresh air, put at rest and loosen restrictive clothing. Keep airway open. Seek medical treatment in case of troubles.

Symptoms: May cause drowsiness or dizziness.

Skin contact

Wash with plenty of water. Change contaminated clothing. In case of skin reactions, consult a physician.

Symptoms: Following skin contact: Danger of cutaneous absorption. Repeated exposure may cause skin dryness or cracking.

Eye contact

Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Subsequently consult an ophthalmologist.

Symptoms: Causes serious eye irritation.

Ingestion

Do not induce vomiting. Give activated carbon (20-40 g in a suspension of 10%). Do not give fatty oils and milk. Keep airway open. Immediately get medical attention. Never give anything by mouth to an unconscious person.

Symptoms: Danger of aspiration!

Immediate Medical Attention

Seek medical treatment in case of troubles (inhalation). In case of skin reactions, consult a physician. Subsequently consult an ophthalmologist. Immediately get medical attention (ingestion).

Medical Treatment

Treat symptomatically. After ingestion of high quantities: Gastric lavage

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water fog, foam, powder, carbon dioxide.

Unsuitable media

High power water jet

Specific hazards

Combustible. Highly flammable liquid and vapour. Vapours are heavier than air and will spread at floor level. Explosive mixtures with air may even form at room temperature. Hazardous vapours may form during fires.

Instructions

Do not expose to high temperature. Use fine water spray to cool endangered containers. Move undamaged containers from immediate hazard area if it can be done safely. In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.

Firefighter Protection

Wear self-contained positive pressure breathing apparatus and full firefighting protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Eliminate all ignition sources if safe to do so. Do not breathe vapour/aerosol. Avoid contact with the substance. Provide adequate ventilation. Keep unprotected people away. When using do not smoke. Avoid sparks. Cordon off downwind area at risk and warn inhabitants.

Environmental

Do not empty into drains. Danger of explosion!

Cleanup methods

Absorb with liquid-binding material and place in closed containers for disposal. Final cleaning.

Materials: liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide adequate ventilation, and local exhaust as needed. Do not breathe vapours. Avoid contact with skin and eyes. Wear protective equipment.

Storage

Keep container tightly closed and in a well-ventilated place. Keep container dry. Keep only in the original container. Protect from heat and direct sunlight. Store containers in upright position.

Hygiene

Avoid contact with skin and eyes. Wear protective equipment.

Fire prevention

Keep away from sources of ignition - No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide for good ventilation or exhaust system or work with completely self-contained equipment.

Hands

Protective gloves according to EN 374. Glove material: Butyl caoutchouc (butyl rubber)-Layer thickness: 0,7 mm. Breakthrough time: >240 min. Observe glove manufacturer's instructions concerning penetrability and breakthrough time.

Eyes

Tightly sealed goggles according to EN 166.

Respiratory

Respiratory protection must be worn whenever the WEL levels have been exceeded. Use filter type A (= against vapours of organic substances) according to EN 14387.

Skin/Body

Wear suitable protective clothing. In case of handling larger quantities: Flame-resistant antistatic protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
LEL (Lower Explosion Limit): 1.80 Vol-%
Metal Corrosion
---
Partition Coefficient
0.29 log P(o/w) (experimental)
Dynamic Viscosity
at 20 °C: 0.4 mPa*s
Explosive Limits
---
Flammability
Highly flammable liquid and vapour.
Odor Threshold
no data available
Colour
colourless
Decomposition Temperature
no data available
Physical State
liquid
Crystallisation Point
---
Auto Ignition Temperature
514 °C (DIN 51794)
Bulk Density
---
Relative Density
---
Vapor Pressure
at 20 °C: 105 hPa
Molecular Weight
72,11 g/mol
Vapor Density
no data available
Relative Evaporation Rate
---
Solubility In Water
at 20 °C: 292 g/L
Voc Content
---
Upper Explosive Limit
UEL (Upper Explosive Limit): 11.50 Vol-%
Properties Status
---
Evaporation Rate
no data available
Appearance
Form: liquid, Colour: colourless
Kinematic Viscosity
---
Density
at 20 °C: 0.805 g/mL
Cloud Point
---
State Under Standard Conditions
---
Physical State Data
liquid
Freezing Point
---
Odor
like solvent
Melting Point
-86 °C
Form
liquid
Flash Point
-4 °C (DIN 51755)
Solidification Point
---
Solubility
at 20 °C: soluble in organic solvents
Softening Point
---
Solubility In Fat
---
Colour Intensity
---
Ph
at 20 °C: 7
Boiling Point
79.6 °C (1013 hPa)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Highly flammable liquid and vapour.

Hazardous reactions

Do not expose to high temperature. Danger of bursting and explosion.

Avoid

Keep away from heat sources, sparks and open flames. Protect against direct sunlight.

Incompatible

Strong oxidizing agents, strong acids, strong alkalis. Exothermic reactions with: Chromium trioxide, oxidizing agents, alcali hydroxide. Release of: peroxides. Ignition hazard! Release of highly flammable gases/vapours. Danger of explosion with: hydrogen peroxide, nitric acid, sulphuric acid. Unsuitable materials: various plastics

Decomposition

Thermal decomposition: no data available. In case of fire may be liberated: Peroxides, carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
Paint related material
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CL-TKDK 090?

The signal word is danger.

What is the physical form of CL-TKDK 090?

CL-TKDK 090 is a liquid appearing as form: liquid, colour: colourless with colourless color. It has like solvent odor.

What is the solubility of CL-TKDK 090?

at 20 °C: soluble in organic solvents

What is CL-TKDK 090 used for?

Cleaning agent. Reserved for industrial and professional use.

What are the hazard statements for CL-TKDK 090?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of CL-TKDK 090?

The melting point is -86 °C and the boiling point is 79.6 °C (1013 hPa).