Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEC7 CLEANER
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Detergent according to Regulation (EC) No 648/2004 Degreasing agent
Uses advised against
No uses advised against known
Manufacturers & Suppliers
TEC7
distributor
Industrielaan 5B, B-2250 Olen
+32 14 85 97 37
Novatech International N.V.
manufacturer
Industrielaan 5B, B-2250 Olen
+32 14 85 97 37
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
EN, FR, DE, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, < 2% aromatics | --- | 30 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Symptoms: Headache. Dizziness. EXPOSURE TO HIGH CONCENTRATIONS: Narcosis. Disturbances of consciousness.
Wash immediately with lots of water. Soap may be used. Take victim to a doctor if irritation persists.
Symptoms: ON CONTINUOUS EXPOSURE/CONTACT: Dry skin. Cracking of the skin.
Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing. Take victim to an ophthalmologist if irritation persists.
Symptoms: Redness of the eye tissue.
Rinse mouth with water. Do not induce vomiting. Consult a doctor/medical service if you feel unwell.
Symptoms: Risk of aspiration pneumonia.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Small fire: Quick-acting ABC powder extinguisher, Quick-acting BC powder extinguisher, Quick-acting class B foam extinguisher, Quick-acting CO2 extinguisher. Major fire: Class B foam (not alcohol-resistant).
Small fire: Water (quick-acting extinguisher, reel); risk of puddle expansion. Major fire: Water; risk of puddle expansion.
Upon combustion: CO and CO2 are formed.
Cool tanks/drums with water spray/remove them into safety.
Firefighter Protection
Heat/fire exposure: self-contained breathing apparatus (EN 136 + EN 137).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop engines and no smoking. No naked flames or sparks.
Contain released product, pump into suitable containers. Plug the leak, cut off the supply. Dam up the liquid spill. Prevent soil and water pollution. Prevent spreading in sewers.
Clean contaminated surfaces with an excess of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Take precautions against electrostatic charges. Gas/vapour heavier than air at 20°C. Observe normal hygiene standards. Remove contaminated clothing immediately. Keep container tightly closed.
Keep container tightly closed.
Observe normal hygiene standards. Remove contaminated clothing immediately.
Keep away from naked flames/heat. Keep away from ignition sources/sparks. Take precautions against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Take precautions against electrostatic charges. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Protective gloves against chemicals (EN 374). Materials: nitrile rubber, Measured breakthrough time: > 480 minutes, Thickness: 0.35 mm, Protection index: Class 6
Face shield (EN 166).
High gas/vapour concentration: full face mask with filter type A.
Protective clothing (EN 14605 or EN 13034).
See headings 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available.
May be ignited by sparks. Gas/vapour spreads at floor level: ignition hazard.
No data available.
Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Take precautions against electrostatic charges.
Oxidizing agents.
Upon combustion: CO and CO2 are formed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3295
- Shipping Name
- Hydrocarbons, liquid, n.o.s.
- Transport Class
- 3
- Packing Group
- III
223
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEC7 CLEANER?
The signal word is danger.
What is the physical form of TEC7 CLEANER?
TEC7 CLEANER is a liquid with no data available on colour color. It has characteristic odour odor.
What is TEC7 CLEANER used for?
Detergent according to Regulation (EC) No 648/2004 Degreasing agent
What are the hazard statements for TEC7 CLEANER?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of TEC7 CLEANER?
The melting point is No data available and the boiling point is 130 °C - 166 °C.