Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECHNOMELT PUR CLEANER ME
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaner
Manufacturers & Suppliers
Henkel Ltd
manufacturer
Adhesives, Wood Lane End, HP2 4RQ Hemel Hempstead, Great Britain
+44 (1442) 278000
https://mysds.henkel.com/index.html#/appSelection
Emergency Contacts
Emergency Contact
+44 0 8701 906777
24 Hours
Technical Services; Henkel Limited
+44 (0) 1606 593933
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Contains no dangerous substances exceeding the limits of the EU-Regulation
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| non-ionic surfactants | --- | 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, consult doctor if complaint persists.
Rinse with running water and soap. Apply replenishing cream. Change all contaminated clothing.
Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Immediate Medical Attention
Seek medical attention if necessary (eyes), consult a doctor (ingestion/inhalation).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All common extinguishing agents are suitable.
High pressure waterjet
In case of fire toxic gases can be released.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Danger of slipping on spilled product.
Do not empty into drains / surface water / ground water.
Take up with liquid-absorbing material (sand).
Materials: liquid-absorbing material (sand)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working.
Store frost-free. Store in a cool place in closed original container. Protect from direct sunlight.
Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation/extraction.
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Polychloroprene (CR; >= 1 mm thickness) or natural rubber (NR; >= 1 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): Polychloroprene (CR; >= 1 mm thickness) or natural rubber (NR; >= 1 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Protective goggles. Protective eye equipment should conform to EN166.
In case of aerosol formation, we recommend wearing of appropriate respiratory protection equipment with ABEK P2 filter (EN 14387). This recommendation should be matched to local conditions.
Wear protective equipment. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
None if used for intended purpose.
See section reactivity
None if used for intended purpose.
None if used properly.
No decomposition if used according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In consultation with the responsible local authority, must be subjected to special treatment.
In consultation with the responsible local authority, must be subjected to special treatment.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TECHNOMELT PUR CLEANER ME?
The signal word is no signal word.
What is the physical form of TECHNOMELT PUR CLEANER ME?
TECHNOMELT PUR CLEANER ME is a liquid with yellow color. It has odourless odor.
What is the solubility of TECHNOMELT PUR CLEANER ME?
Reacts with water.
What is TECHNOMELT PUR CLEANER ME used for?
Cleaner
What is the melting point of TECHNOMELT PUR CLEANER ME?
The melting point is Not applicable, Product is a liquid and the boiling point is 76 - 78 °C (168.8 - 172.4 °F).