NextSDS Logo
Safety Data Sheet EN

Beats The Nail All Purpose Construction Adhesive

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Beats The Nail All Purpose Construction Adhesive
Product Code
7708401

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Construction Adhesive

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200, Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Transportation

1-800-535 -5053

Transportation

1-352-323-3500

Poison Control

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A
Flam. Sol. Cat. 1
Skin Irrit. Cat. 2
STOT RE Cat. 2
STOT SE Cat. 3
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H228 Flammable solid.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/../ equipment.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a POISON CENTER or doctor/physician if you feel unwell.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing.
P370 + P378 In case of fire: Use... to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium Carbonate 471-34-1 30 - 60% Yes
n-Hexane 110-54-3 10 - 30% Yes
Petroleum hydrocarbon resin 64742-16-1 5 - 10% Yes
Magnesite 546-93-0 5 - 10% Yes
Methylcyclopentane 96-37-7 1 - 5% Yes
3-Methylpentane 96-14-0 1 - 5% Yes
2-Methylpentane 107-83-5 1 - 5% Yes

The text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.

Skin contact

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing. Flush exposed area with water while removing contaminated clothing. To remove from skin, remove completely with a dry cloth or paper towel, before washing with detergent and water.

Eye contact

In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Review fire hazards before proceeding with clean up. Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Prevent product from entering drains. Soak up with inert absorbent material and dispose of as hazardous waste. Read all product instructions before using. Scrape up dried material and place into containers.

Environmental

Prevent product from entering drains.

Cleanup methods

Soak up with inert absorbent material and dispose of as hazardous waste. Scrape up dried material and place into containers.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Do not use in areas where static sparks may be generated. Intentional misuse by deliberately concentrating and inhaling vapors may be harmful or fatal.

Storage

Store away from sources of ignition and heat. Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.

Fire prevention

Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames. Do not use in areas where static sparks may be generated.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Appearance
Paste
Kinematic Viscosity
---
Voc Content
---
Boiling Point
66 - 69 °C
Odor
Strong Solvent
Physical State Data
liquid
Softening Point
---
Dynamic Viscosity
Not Established
Odor Threshold
Not Established
Flash Point
Pensky-Martens Closed Cup: 26.7 °C
Physical State
Solid
Partition Coefficient
Not Established
Solubility In Water
Not Established
Bulk Density
---
Molecular Weight
---
Colour Intensity
---
Relative Evaporation Rate
---
Lower Explosive Limit
---
Auto Ignition Temperature
Not Established
Solidification Point
---
Freezing Point
Not Established
Vapor Density
Not Established
Cloud Point
---
Solubility
---
Melting Point
---
Properties Status
---
Decomposition Temperature
Not Established
Density
1.33 g/cm3
Form
---
Flammability
---
Relative Density
---
Metal Corrosion
---
Vapor Pressure
Not Established
Evaporation Rate
Not Established
Explosive Limits
---
State Under Standard Conditions
---
Solubility In Fat
---
Upper Explosive Limit
---
Colour
Gray
Ph
Not Applicable
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Avoid

Excessive heat and freezing. Keep away from open flames, hot surfaces and sources of ignition. Avoid contact with skin, eyes and clothing. Do not smoke.

Incompatible

Open flames, hot surfaces and sources of ignition. Keep away from strong oxidizing agents, heat and open flames. Incompatible with strong bases and oxidizing agents. Avoid contact with strong acids and oxidizable organic materials in the presence of heat.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1133
Shipping Name
Adhesives, containing a flammable liquid
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Beats The Nail All Purpose Construction Adhesive?

The signal word is danger.

What is the physical form of Beats The Nail All Purpose Construction Adhesive?

Beats The Nail All Purpose Construction Adhesive is a solid appearing as paste with gray color. It has strong solvent odor.

What is Beats The Nail All Purpose Construction Adhesive used for?

Construction Adhesive

What are the hazard statements for Beats The Nail All Purpose Construction Adhesive?

This substance has 6 hazard statements:

  • H228: Flammable solid.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H336: May cause drowsiness or dizziness.
  • H373: May cause damage to organs through prolonged or repeated exposure.