Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RAL Acrylic Spray
- Product Code
- 131257, 163173, 163197, 284564, 349461, 350597, 354793, 355956, 356766, 358241, 359286, 365508, 366079, 368660, 373046, 378089, 384332, 398971, 402326, 414862, 453120, 453182, 457937, 459320, 465970, 472558, 473326, 480454, 490866, 492426, 495502, 503702, 504563, 506437, 509384, 518515, 518522, 522956, 522994, 529085, 529092, 535000, 539640, 541773, 541797, 552687, 556319, 565311, 626593, 626913, 626944, 626951, 641589, 641916, 670633, 673795, 674259, 710032, 710728, 719387, 719400, 749766, 802195, 865039, 880353, 880384
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lacquer
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49/6266/75-0
Emergency Contacts
Emergency Contact
+49 6266-75-310
Mo - Th 08:00 am - 04:00 pm, Fr 08:00 am - 00:30 pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 20 - 25% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 12.5% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 5 - 10% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 5 - 10% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 2.5 - 5% | Yes |
The content of Benzene (EINECS-Nr. 200-753-7) in the ingredients is less than 0,1% (Note P Annex 1A 1272/2008 EU), so the classification as carcinogen need not to apply.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Larger fires with water spray or foam.
Water with full jet
No further relevant information available.
Cool containers with water
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
RAL Acrylic Spray
---
MOTIP RAL ACRYL SPRAY Clear Coat
---
MOTIP RAL ACRYL SPRAY various colours
---
MOTIP RAL ACRYL SPRAY various colours
---
MOTIP RAL ACRYL SPRAY various colours
---
TotalSource Acrylic fast dry high coverage coating spray
---
Acrylic acid
CAS: 79-10-7
Acrylic polymer
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Open and handle receptacle with care.
Store in a cool location.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of contact with spray dust protective gloves made of butyl shoud be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products. Protective gloves. Solvent resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Butyl rubber, BR. Penetration time of glove material: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not necessary if room is well-ventilated. Otherwise, filter class A / P2 or self contained. Use suitable respiratory protective device in case of insufficient ventilation.
Light weight protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Employment restrictions concerning juveniles must be observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RAL Acrylic Spray?
The signal word is danger.
What is the physical form of RAL Acrylic Spray?
RAL Acrylic Spray is a aerosol appearing as according to product specification with according to product specification color. It has characteristic odor.
What is RAL Acrylic Spray used for?
Lacquer
What are the hazard statements for RAL Acrylic Spray?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of RAL Acrylic Spray?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..