Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Liquid Cement Crack Filler
- Product Code
- 070798375840
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Spackling Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200 Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Emergency Contact
1-800-535-5053
Emergency Contact
1-352-323-3500
Emergency Contact
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium Carbonate | 471-34-1 | 45 - 70% | Yes |
| Rubber, natural, latex, reaction products with ammonium hydroxide | 129311-51-9 | 7 - 13% | No |
| Titanium dioxide | 13463-67-7 | 1 - 5% | Yes |
| Methanol | 67-56-1 | 0.5 - 1.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If you experience difficulty in breathing, leave the area to obtain fresh air.
Symptoms: difficulty in breathing
Wash skin with soap and water for 15 minutes.
In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.
Symptoms: irritation
If swallowed, DO NOT INDUCE VOMITING.
Immediate Medical Attention
Get medical attention immediately if continued difficulty in breathing is experienced, if skin symptoms persist, after eye contact, or if the substance is swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
No Information
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations.
No Information
absorb with inert material
Related Products
Similar products with comparable safety profiles
Dry Concrete Crack Filler
---
DAP Dry Concrete Crack Filler
---
Concrete Siliconized Filler & Sealant
---
Textured Concrete Latex Filler & Sealant
---
Concrete Patcher & Resurfacer Dry Mix
---
Concrete Patcher & Resurfacer Dry Mix
---
Textured Mortar Premium Elastomeric Latex Filler & Sealant
---
Ready-To-Use Concrete Patch
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Do not breathe dust. Removal of this product after use will result in the generation of Dust. If dry-sanded, exposure to dust may result in the build-up of material in eyes, ears, nose, and mouth which may cause irritation. While dry sanding, use of a NIOSH-approved dust mask is recommended. Wash thoroughly after handling.
Avoid excessive heat and freezing. Do not store at temperatures above 120 °F (49 °C). Store away from caustics and oxidizers. Keep containers tightly closed.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Do not breathe dust. Avoid dust formation in confined areas. Excessive heat and freezing.
Incompatible with strong bases and oxidizing agents.
Above 1450 degree C: SO2 and CaO.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Liquid Cement Crack Filler?
The signal word is warning.
What is the physical form of Liquid Cement Crack Filler?
Liquid Cement Crack Filler is a paste appearing as gray with gray color. It has slight odor.
What is Liquid Cement Crack Filler used for?
Spackling Compound
What are the hazard statements for Liquid Cement Crack Filler?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H335: May cause respiratory irritation.
- H351: Suspected of causing cancer.
- H371: May cause damage to organs.