NextSDS Logo
Safety Data Sheet EN

Concrete Siliconized Filler & Sealant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Concrete Siliconized Filler & Sealant
Product Code
1001001

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Caulking Compound

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200, Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Poison Control

1-800-222-1222

Transportation

1-800-535-5053

Transportation

1-352-323-3500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Solvent ref. light paraffinic 64741-89-5 1 - 5% Yes
Glycol ethers --- 0.1 - 1% No
Limestone 1317-65-3 30 - 60% No
Lubricating petroleum oil 72623-86-0 3 - 7% Yes
Petroleum distillates 64741-88-4 1 - 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

Symptoms: difficulty in breathing

Skin contact

In case of contact, wash skin immediately with soap and water.

Eye contact

In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.

Symptoms: irritation

Ingestion

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water

Specific hazards

None Known.

Instructions

Use water spray to cool exposed surfaces.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment as necessary. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Scrape up dried material and place into containers.

Environmental

Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Dispose of saturated absorbent or cleaning materials appropriately.

Cleanup methods

Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Absorb with inert material. Scrape up dried material and place into containers.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Wash thoroughly after handling.

Storage

Avoid excessive heat and freezing. Store away from caustics and oxidizers.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Bulk Density
---
Partition Coefficient
Not Established
Molecular Weight
---
Freezing Point
Not Established
Appearance
Gray
Flammability
---
Solidification Point
---
Flash Point
100 °C (Seta Closed Cup)
Properties Status
---
State Under Standard Conditions
---
Solubility In Fat
---
Dynamic Viscosity
Not Established
Crystallisation Point
---
Colour
No Information
Metal Corrosion
---
Kinematic Viscosity
---
Odor
Very Slight Ammonia
Density
1.56 - 1.57 g/cm3
Relative Density
---
Vapor Density
Heavier Than Air
Ph
Between 7.0 and 12.0
Softening Point
---
Evaporation Rate
Slower Than n-Butyl Acetate
Colour Intensity
---
Boiling Point
100 °C
Explosive Limits
---
Cloud Point
---
Odor Threshold
Not Established
Relative Evaporation Rate
---
Lower Explosive Limit
N.E.
Solubility
---
Form
---
Auto Ignition Temperature
Not Established
Upper Explosive Limit
N.E.
Solubility In Water
Not Established
Vapor Pressure
Not Established
Melting Point
---
Voc Content
---
Decomposition Temperature
Not Established
Physical State Data
liquid
Physical State
Paste
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Avoid

Excessive heat and freezing.

Incompatible

strong bases and oxidizing agents.

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Concrete Siliconized Filler & Sealant?

The signal word is no signal word.

What is the physical form of Concrete Siliconized Filler & Sealant?

Concrete Siliconized Filler & Sealant is a paste appearing as gray with no information color. It has very slight ammonia odor.

What is Concrete Siliconized Filler & Sealant used for?

Caulking Compound