Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Textured Mortar Premium Elastomeric Latex Filler & Sealant
- Product Code
- 1043101
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Caulking Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200 Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Transportation
1-800-535-5053
Transportation
1-352-323-3500
Poison Control
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 15 - 40% | Yes |
| Diethylene glycol dibenzoate | 120-55-8 | 5 - 10% | No |
| Dipropylene glycol dibenzoate | 27138-31-4 | 1 - 5% | No |
| Ethylene glycol | 107-21-1 | 0.5 - 1.5% | Yes |
| Stoddard solvent | 8052-41-3 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.
Symptoms: difficulty in breathing
Wash skin immediately with soap and water.
Immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.
Symptoms: irritation
If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
None Known.
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as necessary. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Scrape up dried material and place into containers.
Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Dispose of saturated absorbent or cleaning materials appropriately. Local, state and federal laws and regulations may apply to releases and disposal of this material, as well as those materials and items employed in the cleanup of releases. You will need to determine which federal, state and local laws and regulations are applicable. Sections 13 and 15 of this SDS provide information regarding certain federal and state requirements.
Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Absorb with inert material. Scrape up dried material and place into containers.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Textured Concrete Latex Filler & Sealant
---
Concrete Siliconized Filler & Sealant
---
WDS Dynaflex 920 Premium Exterior Elastomeric Sealant Clear
---
Dynaflex 920 Premium Exterior Elastomeric Sealant - Colors
---
Alex Flex Premium Molding & Trim Sealant
---
Blacktop Asphalt Filler & Sealant
---
Alex Fast Dry Acrylic Latex Caulk Plus Silicone
---
Liquid Cement Crack Filler
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Wash thoroughly after handling.
Avoid excessive heat and freezing. Do not store at temperatures above 120 °F (49 °C). Store away from caustics and oxidizers.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Excessive heat and freezing.
strong bases and oxidizing agents.
Normal decomposition products, i.e., COx, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Textured Mortar Premium Elastomeric Latex Filler & Sealant?
The signal word is warning.
What is the physical form of Textured Mortar Premium Elastomeric Latex Filler & Sealant?
Textured Mortar Premium Elastomeric Latex Filler & Sealant is a solid appearing as paste with colored color. It has very slight ammonia odor.
What is Textured Mortar Premium Elastomeric Latex Filler & Sealant used for?
Caulking Compound
What are the hazard statements for Textured Mortar Premium Elastomeric Latex Filler & Sealant?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H371: May cause damage to organs. classified Category 2 evidence from animal studies suggest harmful . Cell death, adverse change in biochemistry, haematology or urinalysis parameters, Central or peripheral nervous system and effects senses. Multifocal or diffuse necrosis, fibrosis or granuloma formation in organs.