Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Seal N Peel Removable Weatherstrip Sealant
- Product Code
- 070798183247
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Caulking Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200, Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Transportation
1-800-535-5053
Transportation
1-352-323-3500
Poison Control
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrotreated heavy naphtha (pe) | 64742-48-9 | 15 - 40% | Yes |
| Xylenes | 1330-20-7 | 15 - 40% | Yes |
| Hydrogenated styrene isoprene block copolymer | --- | 10 - 30% | No |
| Butene, homopolymer | 9003-29-6 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If breathing is difficult, leave the area to obtain fresh air. If continued breathing difficulty is experienced, get medical attention immediately. NOTE: Only trained personnel should administer artificial respiration or give oxygen.
Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Remove and wash contaminated clothing.
If material gets into eyes, flush with water immediately for 15 minutes. Consult a physician.
If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately if continued breathing difficulty is experienced, if symptoms persist after skin contact, if material gets into eyes, or if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
Eliminate sources of ignition: heat, electrical equipment, sparks and flames. Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Review fire hazards before proceeding with clean up. Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak. Prevent product from entering drains. Soak up with inert absorbent material and dispose of as hazardous waste. Read all product instructions before using. Scrape up dried material and place into containers.
Soak up with inert absorbent material, Scrape up dried material and place into containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Touch N Seal One-Component All-Season Foam Sealant
---
Watertight Roof Sealant
---
AMP All Weather Window, Door, Siding & Trim Sealant White
---
AMP All Weather Window, Door, Siding & Trim Sealant Crystal Clear
---
Gutter & Flashing Butyl-Flex Rubber Sealant
---
Window, Door and Siding Silicone Rubber Sealant - White
---
DAP Ultra Clear Flexible Waterproof Sealant
---
Touch N Seal Gun Foam II Sealant Orange
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Wash thoroughly after handling. Do not use in areas where static sparks may be generated.
Store away from sources of ignition and heat. Do not store at temperatures above 120 °F (49 °C). Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.
Wash thoroughly after handling.
Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames. Do not use in areas where static sparks may be generated.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Keep away from open flames, hot surfaces and sources of ignition. Keep away from oxidizing agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions. Do not smoke.
Open flames, hot surfaces and sources of ignition. Keep away from strong oxidizing agents, heat and open flames. Strong acids and strong bases.
Normal decomposition products, i.e., COx, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1133
- Shipping Name
- Adhesives, containing a flammable liquid
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Seal N Peel Removable Weatherstrip Sealant?
The signal word is warning.
What is the physical form of Seal N Peel Removable Weatherstrip Sealant?
Seal N Peel Removable Weatherstrip Sealant is a paste appearing as clear . It has strong solvent odor.
What is Seal N Peel Removable Weatherstrip Sealant used for?
Caulking Compound
What are the hazard statements for Seal N Peel Removable Weatherstrip Sealant?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H332: Harmful if inhaled.