Gorilla Weld - Hardener

When symptoms occur: go into open air and ventilate suspected area. Obtain medical attention if breathing difficulty persists.

Symptoms: Irritation of the respiratory tract and the other mucous membranes.

Remove contaminated clothing. Drench affected area with water for at least 15 minutes. Obtain medical attention if irritation develops or persists.

Symptoms: Redness, pain, swelling, itching, burning, dryness, and dermatitis. May cause an allergic skin reaction.

Rinse cautiously with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Contact causes severe irritation with redness and swelling of the conjunctiva.

Rinse mouth. Do NOT induce vomiting. Obtain medical attention.

Symptoms: Ingestion may cause adverse effects.

Dry chemical powder, alcohol-resistant foam, carbon dioxide (CO₂). Water may be ineffective but water should be used to keep fire-exposed container cool.

Do not use a heavy water stream. A heavy water stream may spread burning liquid.

Highly flammable liquid and vapor. May form flammable or explosive vapor-air mixture. When mixed with air and exposed to an ignition source, flammable vapors can burn in the open or explode in confined spaces. Being heavier than air, vapors may travel long distances to an ignition source and flash back. Runoff to sewer may cause fire or explosion hazard. Reacts violently with strong oxidizers. Increased risk of fire or explosion. The product is normally supplied in a stabilized form. If the permissible storage period and/or storage temperature is exceeded, the product may polymerize with heat evolution. Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances, and/or heavy metal ions. Product reacts violently or explosively with alkali metals, alkaline earth metals, various metal powders, strong alkalis, ammonia, and other incompatible materials.

Remove containers from fire area if this can be done without risk. Use water spray or fog for cooling exposed containers. Do not get water inside containers. In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.

Evacuate unnecessary personnel. Stop leak if safe to do so. Ventilate area. Eliminate ignition sources. Upon arrival at the scene, a first responder is expected to recognize the presence of dangerous goods, protect oneself and the public, secure the area, and call for the assistance of trained personnel as soon as conditions permit.

Take up large spills with pump or vacuum.

Prevent entry to sewers and public waters. Avoid release to the environment.

Clean up spills immediately and dispose of waste safely. Absorb and/or contain spill with inert material. Transfer spilled material to a suitable container for disposal. Use only non-sparking tools.

Materials: inert material

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Avoid breathing vapors, mist, and spray. Avoid contact with skin, eyes and clothing. Take precautionary measures against static discharge. Use only non-sparking tools.

Store in a dry, cool and well-ventilated place. Containers which are opened should be properly resealed and kept upright to prevent leakage. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials. Store in a well-ventilated place. Keep container tightly closed. Keep in fireproof place. Store in original container.

Handle in accordance with good industrial hygiene and safety procedures.

Take precautionary measures against static discharge. Use only non-sparking tools. Keep in fireproof place.

As supplied, this product is stabilized with inhibitors. Extremely flammable liquid and vapor. May form flammable or explosive vapor-air mixture.

Reacts violently with strong oxidizers. Increased risk of fire or explosion. The product is normally supplied in a stabilized form. If the permissible storage period and/or storage temperature is exceeded, the product may polymerize with heat evolution. Polymerization with heat evolution may occur in the presence of radical forming substances (e.g. peroxides), reducing substances, and/or heavy metal ions. Product reacts violently or explosively with alkali metals, alkaline earth metals, various metal powders, strong alkalis, ammonia, and other incompatible materials. Reacts vigorously with water producing heat. Contact with metals and water liberates hydrogen.

This product has been stabilized by inhibitors. Hazardous reactions will not occur under normal conditions. Contains methacrylate compounds that uninhibited can undergo hazardous polymerization at elevated temperatures, or when exposed to strong oxidizers or UV light. Take appropriate precautions to avoid these conditions.

Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames, incompatible materials, and other ignition sources.

Strong acids, strong bases, strong oxidizers. Free radical initiators. Peroxides. Reducing agents. Heavy metal ions. Epoxides. Ultraviolet light. Direct sunlight. Alkali metals. Alkaline earth metals. Various metal powders. Strong alkalis. Ammonia.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.