Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE X33-08I known as X33-08I NO CLEAN FLUX 1GA
- Product Form
- Liquid
- Product Code
- 479675
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Liquid Flux
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Aspiration may cause pulmonary edema or aspiration pneumonia.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Vapors may form explosive mixtures with air.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate personnel to safe areas.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material. Store in a partly filled, closed container until disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Keep away from heat, spark and flame. Wear suitable protective clothing, gloves and eye/face protection. Keep container closed. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full. Wash thoroughly after handling.
Store away from ignition sources. Keep away from heat, spark and flame. Store in original container until ready to use.
Wash thoroughly after handling.
Keep away from heat, spark and flame. Store away from ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use. Electrostatic charge may build-up during handling. Grounding of equipment is recommended.
Not available.
Will not occur.
Keep away from open flames, hot surfaces and sources of ignition.
Incompatible with oxidising agents. Dissolves aluminium and zinc slowly with formation of hydrogen.
Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1219
- Shipping Name
- Isopropanol solution
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE X33-08I known as X33-08I NO CLEAN FLUX 1GA?
The signal word is danger.
What is the physical form of LOCTITE X33-08I known as X33-08I NO CLEAN FLUX 1GA?
LOCTITE X33-08I known as X33-08I NO CLEAN FLUX 1GA is a liquid with colourless / colorless color. It has alcoholic odor.
What is the solubility of LOCTITE X33-08I known as X33-08I NO CLEAN FLUX 1GA?
Soluble Water
What is LOCTITE X33-08I known as X33-08I NO CLEAN FLUX 1GA used for?
Liquid Flux
What are the hazard statements for LOCTITE X33-08I known as X33-08I NO CLEAN FLUX 1GA?
This substance has 3 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of LOCTITE X33-08I known as X33-08I NO CLEAN FLUX 1GA?
The melting point is Not determined and the boiling point is 82 °C (179.6 °F).