Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part A of 2-K-Epoxy Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel
manufacturer
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica, amorphous, naturally | 60676-86-0 | 10 - 30% | Yes |
| Triglycidyl-p-aminophenol | 5026-74-4 | 10 - 30% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 10 - 30% | Yes |
| Tetraglycidyl diaminodiphenylmethane | 28768-32-3 | 5 - 10% | Yes |
| 2,2'-[(1-Methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane | 1675-54-3 | 5 - 10% | Yes |
| Neopentyl glycol diglycidyl ether | 17557-23-2 | 1 - 5% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 1 - 5% | Yes |
| Cristobalite | 14464-46-1 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9313 AERO PART A 66.5GR KIT known as EA 9313 PART A 66.5G E-Z PAK
---
LOCTITE EA 9330 AERO PART B 8OZ
---
LOCTITE EA 9394.2 AERO PART A 200ML
---
LOCTITE EA 9695 080K AERO
---
LOCTITE EA 9820 60Z AERO
---
LOCTITE EA 9359.3 AERO PART B 5GAL known as EA 9359.3 PART B 5 GALLON
---
LOCTITE EA 840C-1 5GAL AERO known as 840C-1 5 GAL PAIL
---
LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. Use only with adequate ventilation. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
May occur.
Keep away from heat, ignition sources and incompatible materials.
Strong acids and oxidizing agents. Amines.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Bisphenol-A Epichlorhydrin resin, Triglycidyl-p-aminophenol)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP?
The signal word is danger.
What is the physical form of LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP?
LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP is a solid with gray / grey color. It has epoxy odor.
What is the solubility of LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP?
Partially miscible ketones; Not soluble Water
What is LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP used for?
Part A of 2-K-Epoxy Adhesive
What are the hazard statements for LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP?
This substance has 7 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP?
The melting point is < -30 °C (< -22°F) and the boiling point is > 200 °C (> 392°F).