Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP
- Product Code
- AA9174320
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part A of 2-K-Epoxy Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Triglycidyl-p-aminophenol | 5026-74-4 | 30 - 60% | No |
| Aluminum | 7429-90-5 | 30 - 60% | No |
| Epoxy resin | --- | 10 - 30% | No |
| Glass, oxide, chemicals | 65997-17-3 | 5 - 10% | No |
| Silica, amorphous, fumed, cryst.-free | 112945-52-5 | 1 - 5% | No |
| Treated fumed silica | 67762-90-7 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9394 AERO PART A 50GR KIT known as EA 9394 PART A 50G PUD.CUP
---
LOCTITE EA 9396C-2 AERO PART A 50GR KIT known as EA 9396/C2 PART A 50G P UD CUP
---
LOCTITE EA 9394.2 AERO PART B 100GR KIT known as EA 9394.2 PART B 100G E -Z PAK
---
LOCTITE EA 960F AERO PART B 50GR KIT
---
LOCTITE EA 9377 AERO PART A 50GR KIT known as EA 9377 PART A 50G PUDDING CUP
---
LOCTITE EA 9321 AERO PART A 20GR KIT
---
LOCTITE EA 9321 AERO PART B 20GR KIT
---
LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For the Part A plus Part B adhesive mixture, follow curing schedule as recommended in product literature. Do not heat Part A at temperatures greater than 80 °C (176 °F). This material may self-react at higher temperatures and cause an exotherm. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full.
Store between 0 °C (32°F) and 5 °C (41°F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Refrigerated storage is recommended to maintain product quality.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
May occur.
Avoid mixing resin (Part A) and curing agent (Part B) unless you plan to use immediately. Do not heat mixed adhesive unless curing surfaces to be bonded. Failure to observe these precautions may result in excessive heat build-up causing an exotherm.
Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Triglycidyl-p-aminophenol, Bisphenol-F Epichlorohydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP?
The signal word is warning.
What is the physical form of LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP?
LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP is a solid with gray / grey color. It has epoxy odor.
What is the solubility of LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP?
Not soluble Water; Partially miscible ketones
What is LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP used for?
Part A of 2-K-Epoxy Adhesive
What are the hazard statements for LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP?
This substance has 5 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
What is the melting point of LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP?
The melting point is -21 °C (-5.8 °F) and the boiling point is > 200 °C (> 392°F).