Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON MS 9380 WH
- Product Code
- 1984250
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
coating maintenance
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Hazardous Component(s) | CAS Number | Percentage* |
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium carbonate | 471-34-1 | 40 - 50% | Yes |
| Dimethoxymethylsilyl Propyl Derivate | 75009-88-0 | 10 - 20% | Yes |
| Titanium dioxide | 13463-67-7 | 5 - 10% | Yes |
| Silica, amorphous, fumed, crystal-free | 112945-52-5 | 1 - 5% | Yes |
IDH number: 1984250 Product name: TEROSON MS 9380 WH
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Immediate Medical Attention
Get medical attention (inhalation), obtain medical attention if irritation persists (skin), seek medical attention from a specialist (eyes), consult a doctor (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not a fire hazard.
Wear self contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up. Soak up with inert absorbent material. Scrape up as much material as possible. Store in a partly filled, closed container until disposal.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material. Scrape up as much material as possible.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.
Store in a cool, dry area. Keep in a cool, well ventilated area.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
This product may react with oxidizing agents.
Not available.
Elevated temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Not available.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON MS 9380 WH?
The signal word is warning.
What is the physical form of TEROSON MS 9380 WH?
TEROSON MS 9380 WH is a paste with white color. It has characteristic odor.
What is TEROSON MS 9380 WH used for?
coating maintenance
What are the hazard statements for TEROSON MS 9380 WH?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of TEROSON MS 9380 WH?
The melting point is Not available. and the boiling point is Not available..