NextSDS Logo
Safety Data Sheet EN

TEROSON MS 935 WH

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON MS 935 WH
Product Code
2480245

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1
Repr. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H361 SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust or fumes.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium carbonate 471-34-1 30 - 60% No
Titanium dioxide 13463-67-7 5 - 10% No
Trimethoxyvinylsilane 2768-02-7 0.1 - 1% No
Methanol 67-56-1 0.1 - 1% No
Bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate 52829-07-9 0.1 - 1% No

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Skin contact

Wipe off paste with paper towel or cloth. Wash with soap and water.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

Do not induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

High volume water jet.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

Wear self contained breathing apparatus.

Firefighter Protection

Wear self contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Scrape up as much material as possible. Store in a partly filled, closed container until disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Do not wear contact lenses.

Storage

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Fire prevention

Keep away from heat, sparks and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
Not available.
Evaporation Rate
Not available.
Flammability
The product is not flammable.
Vapor Pressure
< 0.1 hPa (20 °C (68°F))
Physical State Data
solid
Properties Status
---
Relative Density
1.5
Decomposition Temperature
Not available.
Boiling Point
> 280 °C (> 536°F) Decomposes before boiling point is reached
Ph
Not applicable, Product reacts with water.
Appearance
---
Solidification Point
---
Dynamic Viscosity
Not available.
Freezing Point
---
Crystallisation Point
---
Colour
White
Voc Content
1.70 %
Density
---
Physical State
Paste
State Under Standard Conditions
---
Cloud Point
---
Auto Ignition Temperature
Not available.
Bulk Density
---
Melting Point
Not applicable, Determination technically not possible
Form
Paste
Explosive Limits
---
Flash Point
Not applicable
Metal Corrosion
---
Vapor Density
---
Solubility In Water
---
Softening Point
---
Solubility
Reacts with water. Water
Kinematic Viscosity
Not available.
Molecular Weight
---
Upper Explosive Limit
Not available.
Relative Evaporation Rate
---
Colour Intensity
---
Odor Threshold
Not available.
Solubility In Fat
---
Odor
Characteristic
Lower Explosive Limit
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from open flames, hot surfaces and sources of ignition. Store away from incompatible materials. Protect from direct sunlight. Avoid contact with acids.

Incompatible

Acids and bases. Oxidizing agents. Alkalis.

Decomposition

Oxides of carbon. Oxides of silicon. Toxic fumes. Oxides of sulfur.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON MS 935 WH?

The signal word is warning.

What is the physical form of TEROSON MS 935 WH?

TEROSON MS 935 WH is a paste with white color. It has characteristic odor.

What is the solubility of TEROSON MS 935 WH?

Reacts with water. Water

What are the hazard statements for TEROSON MS 935 WH?

This substance has 2 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

What is the melting point of TEROSON MS 935 WH?

The melting point is Not applicable, Determination technically not possible and the boiling point is > 280 °C (> 536°F) Decomposes before boiling point is reached.