Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil
- Product Code
- 198792
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| White mineral oil (petroleum) | 8042-47-5 | 30 - 60% | Yes |
| Naphtha, petroleum, hydrotreated light | 64742-49-0 | 10 - 30% | Yes |
| propane | 74-98-6 | 5 - 10% | Yes |
| n-Heptane | 142-82-5 | 5 - 10% | Yes |
| Distillates (petroleum), hydrotreated light | 64742-47-8 | 5 - 10% | Yes |
| Stoddard solvent, <0.1% Benzene | 8052-41-3 | 5 - 10% | Yes |
| 2-Butoxyethanol | 111-76-2 | 5 - 10% | Yes |
| Limonene, D- | 5989-27-5 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Contents under pressure. Do not handle or store near an open flame, heat or other sources of ignition. Do not puncture or incinerate pressurized containers. Exposure to temperatures above 49°C (120°F) may cause container to burst.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Flush with water.
Do not allow product to enter sewer or waterways.
Flush with water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep away from heat, spark and flame.
Keep in a cool, well ventilated area. Do not puncture, incinerate, or expose to temperatures above 48.9 °C (120 °F). Heat from sunlight, radiators, stoves, hot water, and other heat sources could cause container to burst.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
Strong oxidizing agents.
Oxides of carbon. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil?
The signal word is danger.
What is the physical form of LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil?
LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil is a aerosol with colourless / colorless color. It has of hydrocarbons odor.
What is the solubility of LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil?
Insoluble Water
What is LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil used for?
Lubricant
What are the hazard statements for LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil?
This substance has 6 hazard statements:
- H222: EXTREMELY FLAMMABLE AEROSOL.
- H229: PRESSURIZED CONTAINER: MAY BURST IF HEATED.
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil?
The melting point is Not available. and the boiling point is 7 °C (44.6 °F).