LOCTITE SI 5870 300MLEN

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.

Wipe off with paper towel or cloth. Rinse with running water and soap. Remove contaminated clothing and shoes. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.

Foam, dry chemical or carbon dioxide. Water spray or fog.

Do not use direct water stream on burning liquid. A solid stream of water may scatter molten product. Do not use high volume water jet.

Vapors are heavier than air and may travel along the ground or be moved by ventilation and subsequently ignited by heat, pilot lights or other ignition sources at locations distant from the material handling point. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Keep unnecessary personnel away.

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Do not allow product to enter sewer or waterways.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Remove all sources of ignition. Use only with adequate ventilation. Use only in area provided with appropriate exhaust ventilation. Vapours should be extracted to avoid inhalation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Wear suitable protective clothing, safety glasses and gloves. When using do not eat, drink or smoke. Do not taste or swallow. Avoid any condition that will suspend or float powder particles in the air creating a dust cloud. Reduce all potential of static electrical discharge through bonding and grounding. Avoid dust formation. Keep away from heat, spark and flame. Avoid spraying/aerosol generation. Keep container tightly sealed.

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Store in a dry place. Avoid moisture. Store in original container until ready to use. Keep out of direct sunlight.

Wash thoroughly after handling. When using do not eat, drink or smoke. Do not taste or swallow.

Remove all sources of ignition. Keep away from heat, spark and flame. Reduce all potential of static electrical discharge through bonding and grounding.

Stable under normal conditions of storage and use.

Not available.

None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.

Avoid temperatures above 300°C (572°F). Excessive heat. Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Exposure to moisture. Avoid dust formation. Vapors may form explosive mixtures with air.

Acids and bases. Oxidizing agents. Amines. Alcohols. Water. Moisture.

Oxides of carbon. Oxides of silicon. Formaldehyde. Oxides of sulfur. Oxides of nitrogen. Organic compounds. Thermal decomposition may produce methanol. Oxides of tin. Ammonia. Toxic and irritating gases.