Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Light Curing Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isobornyl acrylate | 5888-33-5 | 10 - 30% | Yes |
| Acrylate ester | 7328-17-8 | 10 - 30% | Yes |
| 2-[[(Butylamino)carbonyl]oxy]ethyl acrylate | 63225-53-6 | 10 - 30% | Yes |
| N,N-Dimethylacrylamide | 2680-03-7 | 5 - 10% | Yes |
| 2-Hydroxyethyl methacrylate | 868-77-9 | 1 - 5% | Yes |
| diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide | 75980-60-8 | 1 - 5% | Yes |
| Dodecyl acrylate | 2156-97-0 | 1 - 5% | Yes |
| Acrylic acid, reaction products with dipentaerythritol | 1384855-91-7 | 1 - 5% | Yes |
| Silanamine, 1,1,1-trimethyl-N-(trimethylsilyl)-, hydrolysis products with silica | 68909-20-6 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get immediate medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Keep individual calm. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up.
Remove all sources of ignition. Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE AA 3108 LIGHT CURING ADHESIVE known as LOCTITE® 3108™ LIGHT CURE ADHE
---
LOCTITE 4311 LIGHT CURE ADHESIVE known as LOCTITE® 4311™ LIGHT CURE AD
---
LOCTITE 4310 LIGHT CURE ADHESIVE known as LOCTITE® 4310™ LIGHT CURE AD
---
LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic
---
LOCTITE AA 3942 UV ACRYLIC ADHESIVE known as 3942 Light Cure Medical Device
---
LOCTITE AA 3311 RADITION CURING ADHESIVE known as 3311 Light Cure Adhesive Medic
---
LOCTITE AA 3504 LC known as Loctite 3504
---
LOCTITE AA 3926 LC
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Do not taste or swallow.
Store at or below 26 °C (78.8 °F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Protect from direct sunlight. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s).
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
May occur with excessive aging, excessive heat, polymerization catalyst, inhibitor depletion, direct sunlight and under oxygen-free atmospheres.
Keep away from open flames, hot surfaces and sources of ignition. Avoid temperatures above 26°C (80°F). Protect from direct sunlight. Loss of polymerization inhibitor. Loss of dissolved air.
Oxidizing agents. Reducing agents. Acids and bases. Amines. Peroxides. Free radical initiators. Other polymerization initiators. Inert gases. Oxygen scavengers. Reactive metals.
Oxides of carbon. Oxides of nitrogen. Aldehydes. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- NA 1993
- Shipping Name
- Combustible liquid, n.o.s. (N,N-Dimethylacrylamide)
- Transport Class
- Combustible Liquid
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE?
The signal word is danger.
What is the physical form of LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE?
LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE is a liquid with translucent, colourless / colorless, light yellow color. It has mild odor.
What is the solubility of LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE?
Insoluble Water
What is LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE used for?
Light Curing Adhesive
What are the hazard statements for LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE?
This substance has 6 hazard statements:
- H227: COMBUSTIBLE LIQUID
- H302: HARMFUL IF SWALLOWED
- H315: CAUSES SKIN IRRITATION
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION
- H318: CAUSES SERIOUS EYE DAMAGE
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD
What is the melting point of LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE?
The melting point is Not applicable, Product is a liquid and the boiling point is > 93 °C (> 199.4 °F) Polymerization can occur at greater than 150°C (302°F)..