Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic
- Product Code
- 231590
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Ultraviolet adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. If symptoms develop and persist, get medical attention.
Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. Get immediate medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Keep individual calm. Get immediate medical attention.
Immediate Medical Attention
Get medical attention for inhalation, eye contact, and ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel
Remove all sources of ignition. Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material
Related Products
Similar products with comparable safety profiles
LOCTITE AA 3311 RADITION CURING ADHESIVE known as 3311 Light Cure Adhesive Medic
---
LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE
---
LOCTITE AA 3108 LIGHT CURING ADHESIVE known as LOCTITE® 3108™ LIGHT CURE ADHE
---
LOCTITE AA 3942 UV ACRYLIC ADHESIVE known as 3942 Light Cure Medical Device
---
LOCTITE 4311 LIGHT CURE ADHESIVE known as LOCTITE® 4311™ LIGHT CURE AD
---
LOCTITE 4310 LIGHT CURE ADHESIVE known as LOCTITE® 4310™ LIGHT CURE AD
---
LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E
---
LOCTITE AA 3311 MED UV CURE known as Loctite 3311 Med.UV 1L
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not taste or swallow. DO NOT heat or spray. Refer to Section 8.
Store at or below 26 °C (78.8 °F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
May occur.
Keep away from heat, spark and flame. Avoid temperatures above 26°C (80°F). Store away from incompatible materials.
Acids. Bases. Strong oxidizing agents. Reducing agents. Free radical initiators. Other polymerization initiators.
Oxides of carbon. Oxides of nitrogen. Aldehydes. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Isobornyl acrylate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic?
The signal word is danger.
What is the physical form of LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic?
LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic is a highly viscous, liquid with clear to slightly hazy color. It has of acrylate odor.
What is the solubility of LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic?
Slight Water
What is LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic used for?
Ultraviolet adhesive
What are the hazard statements for LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic?
This substance has 4 hazard statements:
- H302: HARMFUL IF SWALLOWED
- H315: CAUSES SKIN IRRITATION
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION
- H318: CAUSES SERIOUS EYE DAMAGE
What is the melting point of LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic?
The melting point is Not applicable, Product is a liquid and the boiling point is > 93 °C (> 199.4 °F).