NextSDS Logo
Safety Data Sheet EN

BONDERITE M-NT 1200 R20 CONVERSION COATING

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-NT 1200 R20 CONVERSION COATING
Synonyms
TECTALIS 1200 R20

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Conversion coating

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hexafluorozirconic acid 12021-95-3 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Skin contact

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.

Ingestion

Get immediate medical attention. Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Get immediate medical attention for all exposure routes.

Medical Treatment

Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn. May react with metals to form flammable hydrogen gas.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing, freezing temperature is <=32F (<=0C).

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Molecular Weight
---
Flammability
Not applicable
Cloud Point
---
Odor Threshold
Not available.
Solidification Point
---
Density
1.00 - 1.03 at 15.6 °C (60.08 °F)
Solubility
Complete
State Under Standard Conditions
---
Physical State Data
liquid
Decomposition Temperature
Not available.
Odor
Sour/Acid
Evaporation Rate
Not determined
Lower Explosive Limit
Not available.
Vapor Pressure
Not determined
Boiling Point
100 °C (212°F)Approximately
Melting Point
Not determined
Flash Point
Not applicable
Auto Ignition Temperature
Not determined
Voc Content
Not applicable
Solubility In Water
---
Freezing Point
---
Vapor Density
---
Form
---
Explosive Limits
---
Metal Corrosion
---
Dynamic Viscosity
Not available.
Colour Intensity
---
Partition Coefficient
Not determined
Physical State
Liquid
Bulk Density
---
Ph
< 2
Upper Explosive Limit
Not available.
Softening Point
---
Relative Evaporation Rate
---
Appearance
---
Properties Status
---
Solubility In Fat
---
Relative Density
---
Crystallisation Point
---
Kinematic Viscosity
Not available.
Colour
Blue
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

None identified.

Incompatible

Avoid contact with organic materials, oils, greases, and any oxidizable materials. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics. This product may react with strong alkalies.

Decomposition

May liberate hydrogen fluoride. Decomposes with heat to produce oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
RQ, Environmentally hazardous substance, liquid, n.o.s.
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE M-NT 1200 R20 CONVERSION COATING known by?

BONDERITE M-NT 1200 R20 CONVERSION COATING is also known as: TECTALIS 1200 R20

What is the hazard signal word for BONDERITE M-NT 1200 R20 CONVERSION COATING?

The signal word is warning.

What is the physical form of BONDERITE M-NT 1200 R20 CONVERSION COATING?

BONDERITE M-NT 1200 R20 CONVERSION COATING is a liquid with blue color. It has sour/acid odor.

What is the solubility of BONDERITE M-NT 1200 R20 CONVERSION COATING?

Complete

What is BONDERITE M-NT 1200 R20 CONVERSION COATING used for?

Conversion coating

What are the hazard statements for BONDERITE M-NT 1200 R20 CONVERSION COATING?

This substance has 2 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of BONDERITE M-NT 1200 R20 CONVERSION COATING?

The melting point is Not determined and the boiling point is 100 °C (212°F)Approximately.