Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER
- Synonyms
- BONDERITE 3410 REPL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Manufacturers & Suppliers
Henkel
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zinc dihydrogen phosphate | 13598-37-3 | 10 - 30% | Yes |
| Phosphoric acid | 7664-38-2 | 10 - 30% | Yes |
| Zinc nitrate | 7779-88-6 | 5 - 10% | Yes |
| Nickel nitrate | 13138-45-9 | 1 - 5% | Yes |
| Fluorosilicic acid | 16961-83-4 | 1 - 5% | Yes |
| Hydrogen fluoride | 7664-39-3 | 0.1 - 1% | Yes |
IDH number: 771874 Product name: BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER known as BONDERITE 3410 REPL
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.
Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.
Get immediate medical attention. Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
GET IMMEDIATE MEDICAL ATTENTION for skin, eye, and ingestion exposure.
Medical Treatment
Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ZN CD-3020 R G-A ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 2798 R B ZINC PHOSPHATE REPLENISHER PA26KG
---
BONDERITE M-ZN 1421-A R ZINC PHOSPHATE
---
BONDERITE M-ZN 2030 R MU ZINC PHOSPHATE
---
BONDERITE M-ZN 3410 R I ZINC PHOSPHATE known as BONDERITE 3410 REPL I
---
BONDERITE M-ZN CD-3042 R ZINC PHOSPHATE known as BONDERITE CD-3042 REPLE NISHER
---
BONDERITE M-ZN 958 R Q3 IBC1709KG ZINC PHOSPHATE
---
BONDERITE M-ZN 1048JJ ZINC PHOSPHATE known as 1048 JJ
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use caution when combining with water; DO NOT add water to acid, ALWAYS add acid to water while stirring to prevent release of heat, steam and fumes. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong alkalies. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics. Adding water to this product may cause localized overheating and splattering.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Phosphoric acid, Fluorosilicic acid)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER known by?
BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER is also known as: BONDERITE 3410 REPL
What is the hazard signal word for BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER?
The signal word is danger.
What is the physical form of BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER?
BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER is a liquid with green color. It has mild odor.
What is the solubility of BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER?
Complete Water
What is BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER used for?
Conversion coating
What are the hazard statements for BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER?
This substance has 10 hazard statements:
- H272: MAY INTENSIFY FIRE; OXIDIZER.
- H290: MAY BE CORROSIVE TO METALS.
- H302 + H312: HARMFUL IF SWALLOWED OR IN CONTACT WITH SKIN.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.