NextSDS Logo
Safety Data Sheet EN

BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER
Synonyms
BONDERITE 952 REPLENISHING Z

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Conversion coating

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Acute Tox. Cat. 4 H302
Acute Tox. Cat. 4 H312
Skin Corr. Cat. 1C H314
Eye Dam. Cat. 1
Resp. Sens. Cat. 1 H334
Skin Sens. Cat. 1 H317
Muta. Cat. 2 H341
Carc. Cat. 1A H350
Repr. Cat. 1B H360
STOT RE Cat. 1 H372
STOT RE Cat. 2 H373

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H302 + H312 HARMFUL IF SWALLOWED OR IN CONTACT WITH SKIN.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H341 SUSPECTED OF CAUSING GENETIC DEFECTS.
H350 MAY CAUSE CANCER.
H360 MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
H373 MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P234 Keep only in original packaging.
P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P284 [In case of inadequate ventilation] wear respiratory protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

Chemical Name CAS Number Concentration Hazardous
Zinc dihydrogen phosphate 13598-37-3 10 - 30% Yes
Phosphoric acid 7664-38-2 5 - 10% Yes
Manganese dihydrogen phosphate 18718-07-5 1 - 5% Yes
Zinc nitrate 7779-88-6 1 - 5% Yes
Nickel nitrate 13138-45-9 1 - 5% Yes
Hydrogen fluoride 7664-39-3 0.1 - 1% Yes
Non hazardous components --- --- No

IDH number: 1695785 Product name: BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER known as BONDERITE 952 REPLENISHING Z

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Skin contact

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Eye flushing should continue during transportation to a doctor.

Ingestion

Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist. Get immediate medical attention.

Medical Treatment

Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. Do not take internally.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Decomposition Temperature
Not available.
Dynamic Viscosity
Not available.
Form
---
Voc Content
Not applicable
Molecular Weight
---
Vapor Pressure
Not available.
Softening Point
---
Boiling Point
> 100 °C (> 212°F) calculated
Odor Threshold
Not available.
Bulk Density
---
Colour
Green
Explosive Limits
---
Solubility In Water
---
Relative Evaporation Rate
---
Auto Ignition Temperature
Not determined
Solubility In Fat
---
Melting Point
Not determined
Flammability
Not applicable
Vapor Density
---
Relative Density
1.32 - 1.35
Colour Intensity
---
Metal Corrosion
---
Flash Point
Not applicable
Freezing Point
---
Upper Explosive Limit
Not determined
Appearance
---
Solubility
Complete Water
Physical State
Liquid
Partition Coefficient
Not determined
Lower Explosive Limit
Not determined
Crystallisation Point
---
Properties Status
---
Cloud Point
---
Evaporation Rate
Not available.
Odor
Acidic
Density
---
Kinematic Viscosity
Not available.
Ph
< 1
Physical State Data
liquid
State Under Standard Conditions
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids, bases and oxidizing agents. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. May liberate hydrogen fluoride.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Phosphoric acid, Fluorosilicic acid)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER known by?

BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER is also known as: BONDERITE 952 REPLENISHING Z

What is the hazard signal word for BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER?

The signal word is danger.

What is the physical form of BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER?

BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER is a liquid with green color. It has acidic odor.

What is the solubility of BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER?

Complete Water

What is BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER used for?

Conversion coating

What are the hazard statements for BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER?

This substance has 10 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H302 + H312: HARMFUL IF SWALLOWED OR IN CONTACT WITH SKIN.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
  • H350: MAY CAUSE CANCER.
  • H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
  • H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.