Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER
- Product Code
- 2208099
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Phosphating Products for Metals
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zinc dihydrogen phosphate | 13598-37-3 | 30 - 40% | No |
| Calcium nitrate | 10124-37-5 | 10 - 20% | No |
| Nitric acid | 7697-37-2 | 5 - 10% | No |
| Nickel nitrate | 13138-45-9 | 0.1 - 1% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Remove contaminated clothing and footwear. Flush with large amounts of water.
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Seek immediate medical attention (skin, eye).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All common extinguishing agents are suitable.
This product is an aqueous mixture which will not burn.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 3410 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 958 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 952 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 952 R Z ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 3080 R ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 1421 HS R D ZINC PHOSPHATE REPLENISHER
---
BONDERITE M-ZN 16 HC ZINC PHOSPHATE REPLENISHER
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not take internally. Wash thoroughly after handling. Do not breathe gas/fumes/vapor/spray. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
No decomposition if used according to specifications.
Reaction with strong bases
None if used for intended purpose. In case of fire toxic gases can be released.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Nitric acid, Zinc dihydrogen phosphate)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER?
The signal word is danger.
What is the physical form of BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER?
BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER is a liquid with light green color. It has odourless odor.
What is BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER used for?
Phosphating Products for Metals
What are the hazard statements for BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER?
This substance has 7 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE M-ZN 848 ZINC PHOSPHATE REPLENISHER?
The melting point is Not applicable, Product is a liquid and the boiling point is >= 100 °C (>= 212°F) no method / method unknown.