Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EIF 1000 KA
- Product Form
- Phase Change Thermal Interface Material (PCTIM)
- Product Code
- 2475108
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Phase Change Thermal Interface Material (PCTIM)
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Polyimide polymer (Proprietary) 60 - 80%; Zinc oxide (1314-13-2) 10 - 30%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyimide polymer | --- | 60 - 80% | Yes |
| Zinc oxide | 1314-13-2 | 10 - 30% | Yes |
IDH number: 2475108 Product name: LOCTITE EIF 1000 KA
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
If symptoms develop and persist, get medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide. Water may be an ineffective extinguishing medium.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Remove all sources of ignition. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Wear suitable protective clothing, gloves and eye/face protection. If product is spilled in the solid state, pick up and place in an appropriate waste disposal container. If product is spilled in the molten state, allow product to solidify before scraping up and disposing of in an appropriate waste disposal container. Avoid dust formation.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear suitable protective clothing, safety glasses and gloves. Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not taste or swallow. Keep container closed.
Store at or below 40 °C (104°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
When using do not eat, drink or smoke. Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition. Exposure to sunlight. Store away from incompatible materials.
Strong oxidizing agents. Acids. Alkalis. Halogenated compounds.
Oxides of carbon. Oxides of nitrogen. Hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Zinc oxide)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EIF 1000 KA?
The signal word is warning.
What is the physical form of LOCTITE EIF 1000 KA?
LOCTITE EIF 1000 KA is a solid, (coated polyimide film) with white, tan color. It has odourless / odorless odor.
What is the solubility of LOCTITE EIF 1000 KA?
Insoluble Water
What is LOCTITE EIF 1000 KA used for?
Phase Change Thermal Interface Material (PCTIM)
What are the hazard statements for LOCTITE EIF 1000 KA?
This substance has 1 hazard statement:
- H315 + H320: CAUSES SKIN AND EYE IRRITATION.
What is the melting point of LOCTITE EIF 1000 KA?
The melting point is 60 °C (140°F) Decomposes.; 60 °C (140°F) (coating compound); 650 °C (1,202°F) (polyimide film) and the boiling point is > 200 °C (> 392°F).