Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EIF 1000KB
- Product Code
- 2026525
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Phase Change Thermal Interface Material (PCTIM)
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyimide polymer | --- | 30 - 60% | Yes |
| Zinc oxide | 1314-13-2 | 10 - 30% | Yes |
IDH number: 2026525 Product name: LOCTITE EIF 1000KB Page 2 of 6
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Seek medical attention immediately.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Seek medical attention immediately (for eye contact). If symptoms develop and persist, get medical attention (for other routes).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Water may be an ineffective extinguishing medium.
Closed containers may explode when exposed to extreme heat.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Remove all sources of ignition. Ensure adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Avoid dust formation.
Related Products
Similar products with comparable safety profiles
LOCTITE EIF 1000 KA
---
LOCTITE EIF 1000K3 known as K3-076-059
---
LOCTITE EIF 1000 KA known as Isostrate 0.87 x 0.67
---
LOCTITE EIF 1000 KA known as Isostrate 2.80" x 1.8A"
---
LOCTITE ECCOBOND LCM 1000AF
---
LOCTITE EA 4108
---
LOCTITE EIF 1000 K3 known as Isostrate 6.12 X 0.82
---
LOCTITE EIF 1000 K3 known as Isostrate 5.00 X 2.30
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. When using do not eat, drink or smoke. Wear suitable protective clothing, safety glasses and gloves. Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Refer to Section 8. Keep container closed. Wash thoroughly after handling.
For safe storage, store at or below 40 °C (104°F) Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
When using do not eat, drink or smoke. Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition. Exposure to sunlight. Store away from incompatible materials.
Strong acids, alkalies and oxidizing agents. Halogenated compounds.
Oxides of carbon. Oxides of nitrogen. Hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Zinc oxide)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EIF 1000KB?
The signal word is warning.
What is the physical form of LOCTITE EIF 1000KB?
LOCTITE EIF 1000KB is a solid, (coated polyimide film) with white, tan color.
What is the solubility of LOCTITE EIF 1000KB?
Insoluble Water
What is LOCTITE EIF 1000KB used for?
Phase Change Thermal Interface Material (PCTIM)
What are the hazard statements for LOCTITE EIF 1000KB?
This substance has 1 hazard statement:
- H315 + H320: CAUSES SKIN AND EYE IRRITATION.
What is the melting point of LOCTITE EIF 1000KB?
The melting point is 60 °C (140°F) Decomposes. and the boiling point is > 200 °C (> 392°F).