Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SI 5607 400mL PART A
- Product Form
- Silicone sealant
- Product Code
- 2946008
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s) | CAS Number | Weight %* | Calcium carbonate | 471-34-1 | 30 - 60
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium carbonate | 471-34-1 | 30 - 60% | Yes |
IDH number: 2946008 Product name: LOCTITE SI 5607 400mL PART A
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms develop and persist, get medical attention.
Wipe off paste with paper towel or cloth. Wash with soap and water. If skin irritation persists, call a physician.
Symptoms: skin irritation
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If adverse health effects develop seek medical attention.
Symptoms: adverse health effects
Do not induce vomiting. In case of adverse health effects seek medical advice.
Symptoms: adverse health effects
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Scrape up as much material as possible. Store in a partly filled, closed container until disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not wear contact lenses.
store between 8 °C (46.4 °F) and 28 °C (82.4 °F)
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Excessive heat.
Acids and bases. Oxidizing agents.
Oxides of carbon. Oxides of silicon. Formaldehyde
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SI 5607 400mL PART A?
The signal word is warning.
What is the physical form of LOCTITE SI 5607 400mL PART A?
LOCTITE SI 5607 400mL PART A is a paste with white color. It has characteristic odor.
What is the solubility of LOCTITE SI 5607 400mL PART A?
Insoluble Water
What are the hazard statements for LOCTITE SI 5607 400mL PART A?
This substance has 1 hazard statement:
- H320: CAUSES EYE IRRITATION.
What is the melting point of LOCTITE SI 5607 400mL PART A?
The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F).