LOCTITE ABLESTIK ABP 2025DSINP 10CC SY

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.

Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.

Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.

Water spray (fog), foam, dry chemical or carbon dioxide.

A solid stream of water may scatter molten product.

The product may undergo spontaneous polymerization at high temperatures. Polymerization is exothermic and may cause damage to the container and/or release of thermal decomposition products.

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away.

Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Ensure adequate ventilation. Remove all sources of ignition. Keep unnecessary personnel away. Wear appropriate personal protective equipment. Refer to Section 8 'Exposure Controls / Personal Protection' prior to clean up.

Do not allow product to enter sewer or waterways.

Scrape up spilled material and place in a closed container for disposal.

Materials: sand, silica gel, acid binder, universal binder, sawdust

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wear suitable protective clothing, safety glasses and gloves. Keep container closed. Open and handle container with care. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full.

Store at or below -40 °C (-40°F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in a dry place. Avoid moisture. Keep away from heat, spark and flame. Store in original container until ready to use. Keep out of direct sunlight. Store away from incompatible materials identified in section 10. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s).

Wash thoroughly after handling.

Remove all sources of ignition. Use non-sparking tools when opening or closing containers. Keep away from heat, spark and flame.

Stable under normal conditions of storage and use.

Not available.

None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.

High temperatures. Excessive heat and contamination. Prolonged heating at temperatures above 150 °C. Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Take measures to prevent the build-up of electrostatic charges. Avoid moisture. Exposure to light. UV light. Loss of dissolved air. Loss of polymerization inhibitor. Humidity.

Oxidizing agents. Peroxides. Halogens. Alkalis. Acids. Hydrogen fluoride. Reducing agents. Free radical initiators. Inert gases. Oxygen scavengers. Bases. Amines. Copper. Iron. Rust. Water. Moisture. Heavy metals. Metal salts.

Oxides of carbon. Methacrylate monomer Organic compounds. Oxides of nitrogen. Irritating organic vapours. Oxides of phosphorus. Phosphine. Acrylate monomers may be released upon combustion. Formaldehyde. Methanol. Oxides of silicon. Butadiene. Maleic anhydride. Hydrocarbons. Hydrogen cyanide. Acrylonitrile. Toxic fumes.