Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SI 5970 BK CR50ML EN/DE
- Product Form
- Silicone sealant
- Product Code
- 3004511
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | No |
| Calcium carbonate | 471-34-1 | 5 - 10% | No |
| N/A | --- | 1 - 5% | No |
| Carbon black - Nano | 1333-86-4 | 1 - 5% | No |
| 1,1,1,3,3,3-Hexamethyldisilazane | 999-97-3 | 1 - 5% | No |
| 3-aminopropyltriethoxysilane | 919-30-2 | 0.1 - 1% | No |
| Quartz (SiO2) | 14808-60-7 | 0.1 - 1% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours or decomposition products. If symptoms develop and persist, get medical attention.
Wipe off paste with paper towel or cloth. Wash with soap and water. If skin irritation persists, call a physician.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Prevent vomiting if possible. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Prevent inhalation of fumes and gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Maintain good ventilation for large spills.
Do not allow material to contaminate ground water system.
Scrape up as much material as possible. Place scrap material in a well ventilated area and allow to cure to rubber.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
Store between 8 °C (46.4 °F) and 28 °C (82.4 °F). Store in a dry area below 90° F.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Exposure to moisture.
Acids. Bases. Oxidizing agents.
Formaldehyde Oxides of silicon. Thermal decomposition can lead to release of irritating gases and vapors. Methanol is liberated slowly upon exposure to moisture.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SI 5970 BK CR50ML EN/DE?
The signal word is warning.
What is the physical form of LOCTITE SI 5970 BK CR50ML EN/DE?
LOCTITE SI 5970 BK CR50ML EN/DE is a paste with black color. It has mild, alcohol odor.
What is the solubility of LOCTITE SI 5970 BK CR50ML EN/DE?
Polymerises in presence of water. Water
What are the hazard statements for LOCTITE SI 5970 BK CR50ML EN/DE?
This substance has 2 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE SI 5970 BK CR50ML EN/DE?
The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212°F).