Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SI 5331 WH TB100ML EN/DE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Silicone sealant
Manufacturers & Suppliers
Henkel New Zealand Ltd
national supplier
2 Allens Rd Auckland, 2013 New Zealand
+64 (9) 272-6710
Emergency Contacts
Emergency Contact
0800 243 622
24 HOUR
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silica, amorphous, fumed, cryst.-free | 112945-52-5 | 10 - 20% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 1 - 10% | Yes |
| Methylsilanetriyl triacetate | 4253-34-3 | 3 - 5% | Yes |
| non hazardous ingredients~ | --- | 60 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Seek medical advice.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Do not induce vomiting. Seek medical advice.
Immediate Medical Attention
Immediate medical treatment necessary.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, foam, powder, Fine water spray
None known
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not let product enter drains.
Scrape up as much material as possible. Ensure adequate ventilation. Store in a partly filled, closed container until disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Vapours should be extracted to avoid inhalation.
Store in sealed original container protected against moisture. Store in a cool, well-ventilated place.
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Polymerises in presence of water.
Stable under normal conditions of storage and use.
Strong oxidizing agents.
At higher temperatures (>150C) may release formaldehyde (traces). Acetic acid is liberated slowly upon contact with moisture.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local and national regulations.
Small amounts of cured or dried product residues can be disposed of as household waste or as industrial waste similar to household waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
HSNO Approval Number: Group standard HSR002670
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SI 5331 WH TB100ML EN/DE?
The signal word is danger.
What is the physical form of LOCTITE SI 5331 WH TB100ML EN/DE?
LOCTITE SI 5331 WH TB100ML EN/DE is a liquid appearing as white with white color. It has acetic acid odor.
What is LOCTITE SI 5331 WH TB100ML EN/DE used for?
Silicone sealant
What are the hazard statements for LOCTITE SI 5331 WH TB100ML EN/DE?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H373: May cause damage to organs through prolonged or repeated exposure.