Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP
- Product Code
- 1367447
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Assembly adhesives
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epoxy resin | --- | 10 - 30% | Yes |
| Epoxy resin | --- | 10 - 30% | Yes |
| Epoxy resin | --- | 5 - 10% | Yes |
| Modified epoxy resin | --- | 5 - 10% | Yes |
| Non hazardous components | --- | --- | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Give a conscious person several glasses of water. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
None expected.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9695 050NW AERO known as HYSOL EA 9695 .050 PSF NW
---
LOCTITE EA 9681 060NW AERO known as HYSOL EA 9681.060 PSF NW SX
---
LOCTITE EA 9845LC 020-029 AERO known as HYSOL EA 9845 LSC 0.020/0.029 S
---
LOCTITE EA 9696 40M AERO known as HYSOL EA 9696 40mil NW
---
LOCTITE EA 9690 030NW AERO known as HYSOL XEA 9690 .030 M
---
LOCTITE EA 9845LA 020-016 AERO known as HYSOL EA 9845 LSA 0.020/0.016 S
---
LOCTITE EA 608 B AERO known as HYSOL 608 - PART B
---
LOCTITE EA 9696 045K AERO known as LOCTITE EA 9696 .045 PSF K
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. Use only with adequate ventilation. Keep container closed.
Keep in a cool, well ventilated area. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation should effectively remove and prevent buildup of any dust generated from the handling of this product.
Wear impervious gloves for prolonged contact.
Safety goggles or safety glasses with side shields.
When dusts or thermal processing fumes are generated and ventilation is not sufficient to effectively remove them, appropriate NIOSH/MSHA approved respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Store away from incompatible materials. Heat, flames, sparks and other sources of ignition.
Keep away from strong oxidizing agents, strong Lewis or mineral acids. Reducing agents. Isocyanates. Alkalis.
Oxides of carbon and nitrogen, aldehydes, acids and undetermined organics. Oxides of phosphorus.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP?
The signal word is warning.
What is the physical form of LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP?
LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP is a solid, film with light tan color. It has slight odor.
What is the solubility of LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP?
Insoluble Water; Partially miscible ketones
What is LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP used for?
Assembly adhesives
What are the hazard statements for LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE EA 9896 025WPP AERO known as HYSOL EA 9896 .025 PSF WPP?
The melting point is 3 °C (37.4 °F) and the boiling point is > 120 °C (> 248°F).