Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite® PL® Polyurethane Door, Window and Siding Sealant
- Product Code
- 1618516
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 10 - 20% | Yes |
| Stoddard solvent, <0.1% Benzene | 8052-41-3 | 1 - 5% | Yes |
| Talc | 14807-96-6 | 1 - 5% | Yes |
| Calcium oxide | 1305-78-8 | 1 - 5% | Yes |
| Toluene-2,6-diisocyanate | 91-08-7 | 0.1 - 1% | Yes |
| Titanium dioxide | 13463-67-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Wash affected area immediately with soap and water. Remove contaminated clothes.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
Immediate medical treatment necessary (inhalation). Seek immediate medical attention (eye contact). Seek medical advice immediately (ingestion). If symptoms develop and persist, get medical attention (skin contact).
Medical Treatment
An individual having a dermal or pulmonary sensitization reaction to this material should be removed from further exposure to any diisocyanate. Treatment based on judgement of the physician in response to reactions of the patient.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Carbon dioxide.
None known.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not empty into drains / surface water / ground water.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
Loctite PL Polyurethane Roof and Flashing Sealant
---
Loctite Clear Silicone Sealant
---
Window, Door and Siding Silicone Rubber Sealant - White
---
Window, Door & Siding 100% Silicone Rubber Sealant - Clear
---
Loctite 2in1 All Purpose Seal & Bond Sealant
---
Touch N Foam Professional Window & Door PU Foam Sealant
---
DAP Window, Door & Siding 100% Silicone Rubber Sealant - Aluminum
---
AMP All Weather Window, Door, Siding & Trim Sealant White
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid extreme temperatures. Wash thoroughly after handling. Protect from moisture. Use only with adequate ventilation.
Store between 18.3 °C (64.9 °F) and 40 °C (104°F). Avoid moisture. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Contact with moisture, other materials that react with isocyanates, or temperatures above 350° F (177° C), may cause polymerization.
Avoid moisture. Keep away from open flames, hot surfaces and sources of ignition. Prolonged exposure to heat.
Oxidizing agents. Alcohols. Water. Strong bases.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. nitrogen oxides Aromatic isocyanates. carbon oxides. carbon monoxide Hydrogen cyanide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite® PL® Polyurethane Door, Window and Siding Sealant?
The signal word is danger.
What is the physical form of Loctite® PL® Polyurethane Door, Window and Siding Sealant?
Loctite® PL® Polyurethane Door, Window and Siding Sealant is a thixotropic solid with tan color. It has slight odor.
What is Loctite® PL® Polyurethane Door, Window and Siding Sealant used for?
Sealant
What are the hazard statements for Loctite® PL® Polyurethane Door, Window and Siding Sealant?
This substance has 5 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H330: FATAL IF INHALED.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H351: SUSPECTED OF CAUSING CANCER.
What is the melting point of Loctite® PL® Polyurethane Door, Window and Siding Sealant?
The melting point is Not applicable and the boiling point is Not available..