Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite 2in1 All Purpose Seal & Bond Sealant
- Product Code
- 2020629
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 10 - 30% | Yes |
| Ethylene glycol | 107-21-1 | 1 - 5% | Yes |
| Titanium dioxide < 1% particles with diameter ≤ 10 μm | 13463-67-7 | 1 - 5% | Yes |
| Palygorskite ([Mg(Al0.5-1Fe0-0.5)]Si4(OH)O10.4H2O) | 12174-11-7 | 0.1 - 1% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Rinse out mouth. Do not drink. Never give anything by mouth to an unconscious person. If adverse health effects develop seek medical attention.
Immediate Medical Attention
Seek immediate medical attention for eye contact.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is an aqueous mixture which will not burn. If evaporated to dryness, the solid residue may pose a slight fire hazard.
Water may be unsuitable as an extinguishing media, but may be helpful in keeping adjacent containers cool.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Ventilate area. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Loctite Spray Adhesive Multi Purpose
---
Loctite Spray Adhesive Multi Purpose
---
Loctite Clear Silicone Sealant
---
Loctite Power Grab All Purpose Express
---
Loctite 7500
---
Loctite PSS All Purpose Adhesive Caulk
---
LOCTITE BONDACE 232HF-2
---
LOCTITE AA 5251 A known as LOCTITE® 5251A™ SEALANT PART N
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Avoid prolonged or repeated skin contact with this material. Use only with adequate ventilation. Wash hands before breaks and immediately after handling the product. Keep out of the reach of children.
Keep from freezing.
Wash hands before breaks and immediately after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids, bases and oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite 2in1 All Purpose Seal & Bond Sealant?
The signal word is warning.
What is the physical form of Loctite 2in1 All Purpose Seal & Bond Sealant?
Loctite 2in1 All Purpose Seal & Bond Sealant is a solid with white color. It has acetate odor.
What is the solubility of Loctite 2in1 All Purpose Seal & Bond Sealant?
Soluble
What are the hazard statements for Loctite 2in1 All Purpose Seal & Bond Sealant?
This substance has 2 hazard statements:
- H319: CAUSES SERIOUS EYE IRRITATION.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of Loctite 2in1 All Purpose Seal & Bond Sealant?
The melting point is Not available. and the boiling point is > 100 °C (> 212°F).